+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: THE DEFINITIVE STAINTUNE vs. ARROW SLIP-ON EXHAUST THREAD!! (/showthread.php?tid=9486)
RE: THE DEFINITIVE STAINTUNE vs. ARROW SLIP-ON EXHAUST THREAD!! - Tripod_imp - 01-11-2016
(01-11-2016, 10:29 AM)Jim21680_imp Wrote: Nemo, are you cross-shopping the two?
In my opinion, it's a fairly simple (but perhaps not easy) choice; if you like a cone-shaped pipe, the Arrow. For a more tubular design, Staintune.
There may be very slight differences in the way they sound, but I can basically guarantee that whatever you choose, you will like it.
If I were going to cross shop exhaust pipes, the first thing I would do is check with Bruce Jenner. I understand he is a quite adept at cross shopping headers, pipes, etc...
(I couldn't help it folks
, my apologies if I offended anyone.)P.S. I have a Staintune. I really like the sound. Have Arrows on a couple of my Triumphs.
Chris
RE: THE DEFINITIVE STAINTUNE vs. ARROW SLIP-ON EXHAUST THREAD!! - jrns_imp - 01-12-2016
(01-11-2016, 04:19 PM)MikeOxbig_imp Wrote: I have the Arrow and I'm very happy with it. Great sound, looks, quality and it's smaller/lighter than stock. I like the Staintune a lot as well and definitely could have gone either way. The Arrow does cost less.
Another (minor) benefit of the Arrow is that you have the choice to keep the quiet baffle in or out of the muffler so you can pick the noise level.
that's good to know on the Arrow- is it easy to swap the baffle out? thanks for sharing.
RE: THE DEFINITIVE STAINTUNE vs. ARROW SLIP-ON EXHAUST THREAD!! - MikeOxbig_imp - 01-12-2016
jrns, it's very easy to remove the quiet baffle. First, you have to break this small welded tab (size of this small circle: O), I just used a screwdriver and knocked it off. Then you use a snap-ring plier to remove the snap-ring. After removing the snap-ring, you can use pliers to pull out the baffle.
RE: THE DEFINITIVE STAINTUNE vs. ARROW SLIP-ON EXHAUST THREAD!! - jrns_imp - 01-12-2016
(01-12-2016, 05:36 AM)MikeOxbig_imp Wrote: jrns, it's very easy to remove the quiet baffle. First, you have to break this small welded tab (size of this small circle: O), I just used a screwdriver and knocked it off. Then you use a snap-ring plier to remove the snap-ring. After removing the snap-ring, you can use pliers to pull out the baffle.
thanks for that!
a slip on (possibly an arrow) is another mod on my list...I better start buying lottery tickets
RE: THE DEFINITIVE STAINTUNE vs. ARROW SLIP-ON EXHAUST THREAD!! - Guth_imp - 01-12-2016
Something that really appealed to me about the Staintune other than the tone of the exhaust note (which is excellent) was the fact that it never needs repacking. This also allows them to pull off such beautiful construction without the use of rivets.
That said, the price was definitely on the high side and it was perhaps the only thing that I can remember owning that when asked "why" by my wife I couldn't even attempt to explain. "Just because I wanted it" isn't exactly a selling point, lol.
RE: THE DEFINITIVE STAINTUNE vs. ARROW SLIP-ON EXHAUST THREAD!! - Nemo_imp - 01-12-2016
RE: THE DEFINITIVE STAINTUNE vs. ARROW SLIP-ON EXHAUST THREAD!! - Pterodactyl_imp - 01-13-2016
(01-12-2016, 02:57 PM)Guth_imp Wrote: Something that really appealed to me about the Staintune other than the tone of the exhaust note (which is excellent) was the fact that it never needs repacking. This also allows them to pull off such beautiful construction without the use of rivets.
That said, the price was definitely on the high side and it was perhaps the only thing that I can remember owning that when asked "why" by my wife I couldn't even attempt to explain. "Just because I wanted it" isn't exactly a selling point, lol.
It may not be as expensive as you think. As Cormanus and I have suggested in other threads, check the cost of a direct order from Australia as opposed to buying from the, perhaps aptly named, "Pirates Lair". The AUD (sometimes known as the South Pacific Peso) has now fallen below USD .70.
Cheers
Look at: [url=http://cb1100forum.com/forum/showthread.php?tid=7055]THIS THREAD
RE: THE DEFINITIVE STAINTUNE vs. ARROW SLIP-ON EXHAUST THREAD!! - Cormanus - 01-13-2016
(01-13-2016, 06:16 AM)Huladog_imp Wrote: Well I DID place an online order on 12/21/15 and they did confirm the order back to me, but after that I haven't heard a peep out of Staintune.
No tracking number, etc.
So I've been replying to their email to get an update, as of 1/13/16 not a word.
Any of you guys in Australia know what's up with Staintune? If they don't reply I'm going to have to cancel my order, get a refund via PayPal and probably order a Moriwaki from our friends in Japan.
Aloha,
Huladog
But then this is a bit alarming. I'm not in Australia, Huladog, or I'd call them for you.
RE: THE DEFINITIVE STAINTUNE vs. ARROW SLIP-ON EXHAUST THREAD!! - Pterodactyl_imp - 01-13-2016
Cormanus, you've shamed me. 'Dog, PM me with your order details if you would like me to chase it up.
Cheers
RE: THE DEFINITIVE STAINTUNE vs. ARROW SLIP-ON EXHAUST THREAD!! - Huladog_imp - 01-14-2016
Pterodactyl, PM sent!
Mahalo,
Huladog