![]() |
|
Pirellis fitted - Printable Version +- The CB1100 Community Forum (https://cb1100forum.net/forum) +-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5) +--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8) +--- Thread: Pirellis fitted (/showthread.php?tid=9459) |
RE: Pirellis fitted - Henrik_imp - 07-17-2015 So Ptero, how are those Angels working out? I would love to hear some riding feedback. RE: Pirellis fitted - Pterodactyl_imp - 07-19-2015 G'day Henrik. As of today I have only put 9.6kms on them, so too early to report. I have just had a two week holiday in Thailand and on returning to Australia we went to Canberra to visit friends. So no chance to ride any distance. Before riding again I am going to service the brake system. I did notice that when I replaced the front wheel after the tyre change that the front pads were approaching the wear limit. Also the lever feels a little soft despite a thorough brake bleed. I suspect that maybe one of the caliper piston seals may have been contaminated so I will pull the front calipers apart, inspect and then replace the seals and pads. Cheers. RE: Pirellis fitted - Henrik_imp - 07-19-2015 Thanks for the update! I hope Thailand was good, and that you can now get back to the important work of getting your bike take care off!! Cheers, Henrik RE: Pirellis fitted - chync_imp - 08-09-2015 (07-19-2015, 09:58 AM)Pterodactyl_imp Wrote: G'day Henrik. As of today I have only put 9.6kms on them, so too early to report. I have just had a two week holiday in Thailand and on returning to Australia we went to Canberra to visit friends. So no chance to ride any distance. Before riding again I am going to service the brake system. I did notice that when I replaced the front wheel after the tyre change that the front pads were approaching the wear limit. Also the lever feels a little soft despite a thorough brake bleed. I suspect that maybe one of the caliper piston seals may have been contaminated so I will pull the front calipers apart, inspect and then replace the seals and pads. Any update on how you like these? I am considering a pair. RE: Pirellis fitted - Pterodactyl_imp - 08-09-2015 ^^^^^. I am taking them for a long ride today so will post this evening. Cheers RE: Pirellis fitted - kmoney_imp - 08-09-2015 You will like them. I got these fitted on my CB about 3k ago. They are like riding on velcro compared to the stock Bridgestones (which were pretty good in their own right). RE: Pirellis fitted - the Ferret - 08-09-2015 Ptero, did you measure the depth of the tread front and rear? RE: Pirellis fitted - Pterodactyl_imp - 08-09-2015 (08-09-2015, 01:06 PM)The ferret_imp Wrote: Ptero, did you measure the depth of the tread front and rear? Front: 4.3mm ![]() 2.8mm ![]() Rear: 6mm ![]() 4mm ![]() Cheers RE: Pirellis fitted - noroomtomove - 08-09-2015 A man with a Vernier now that brings a smile to my face, all the best with your new shoes. Regards RE: Pirellis fitted - Pterodactyl_imp - 08-09-2015 Thanks mate. |