+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: Road Comet question... (/showthread.php?tid=9432)
RE: Road Comet question... - Randy B - 02-23-2016
(02-23-2016, 03:02 PM)Rebel73_imp Wrote: For the guys who have a Road Comet screen, did the inside come unpainted? Mine arrived today with the inside painted the same red as the exterior. I seem to recall a post saying it comes unpainted? [url=http://smg.photobucket.com/user/RobertB755/media/20160223_181523_zps7zsgwika.jpg.html]
![[Image: a469c81e639002e3754dff5d1d082637.jpg]](https://cb1100forum.net/forum/uploads/imp/201602/a469c81e639002e3754dff5d1d082637.jpg)
(02-23-2016, 10:51 PM)CB4ME_imp Wrote: The red ones come unpainted. The fiberglass itself is red, and the inside is easy to paint. I did mine in silver.
He said his came painted.
RE: Road Comet question... - Rebel73_imp - 02-24-2016
The fiberglass itself is red? Hmm. Well, in any case, I'm leaning towards painting it flat black to give it a more finished look. I do think it looks a bit unfinished as is.
RE: Road Comet question... - Chapomis_imp - 02-24-2016
I was thinking that I would spray mine with plasti dip so it might have a smoother finish
RE: Road Comet question... - Rebel73_imp - 02-24-2016
Yah, Plasti-dip might be a good option. My sister used it on her car's wheels and it looked pretty good.
RE: Road Comet question... - Ron in MO_imp - 02-24-2016
Rob, mine came the same way yours did. I ended up painting the inside with a brush using flat black enamel paint I picked up at Home Depot and it came out great. You don't even have to tape for overspray.
RE: Road Comet question... - Rebel73_imp - 02-24-2016
(02-24-2016, 11:56 AM)Ron in MO_imp Wrote: Rob, mine came the same way yours did. I ended up painting the inside with a brush using flat black enamel paint I picked up at Home Depot and it came out great. You don't even have to tape for overspray.
That's a good idea, Ron. Taping is a PITA!
RE: Road Comet question... - Papa Weeley_imp - 02-25-2016
...to be honest, you can't see a whole lot of the inside when it's mounted, from a seated position.
I never even thought of the inside finish until I read this!
RE: Road Comet question... - EGAlvarez_imp - 02-26-2016
The unfinished, raw looking inside of my RC drove me absolutely crazy and I felt that is was unacceptable on a $500 bikini fairing. Since the inside is a rough fiberglass finish, I used flat black paint with a textured finish. I am very please with the results. Like any painting job, prep is critical. Invest the time to very carefully mask off the red edges with green frog tape.
Here's how mine turned out (The GPS has since been moved a little down and to the left as it was blocking the instruments and taking the key in and out of the ignition was a PITA with the GPS in the way)
Frog Tape:
I used this textured finish paint, but in black:
Good luck!
Eddy
RE: Road Comet question... - Chapomis_imp - 02-26-2016
Looks nice EG. Some rubber caps for the screws would finish it off nice. I wonder if the hardware store sells those ?
RE: Road Comet question... - Rebel73_imp - 02-26-2016
Looks great, EG. Thanks for the tips.