The CB1100 Community Forum
Moriwaki Skid Pads - Printable Version

+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: Moriwaki Skid Pads (/showthread.php?tid=9421)

Pages: 1 2 3


RE: Moriwaki Skid Pads - hdvalente_imp - 12-17-2015

(12-17-2015, 08:48 AM)jrns_imp Wrote:
(12-17-2015, 04:04 AM)hdvalente_imp Wrote: I have an update on the frame sliders purchase.

Sato Racing still doesn't have the frame sliders in stock so I did some research and found out that they are from japan:

http://www.babyface.co.jp/frameslider15CB1100.htm

I ordered some stuff from webike together with it and got free shipping.
Samurider can also order them for 14500 JPY (~$118) + shipping.

They came assembled and just need to mount to the frame using the frame existing bolts (no bolts supplied).

I will take some pictures tonight and add to this post.

Since the weather here is not favoring any rides (10" of snow on Tuesday, currently 18F and icy roads everywhere) I won't be able to test them as pegs anytime soon. Forecast for the next 10 days is not showing anything above 36F (mostly under 30F), plus a couple of days of snow forecast for next week as well. 2015 is most definitely over for riding here... Sad

For those with nicer weather, enjoy and ride safe!!

I have the Moriwaki sliders and the ones you have look virtually identical.
here is some feedback for you.
I was on a long hot group ride last summer - we stopped after about 3 hours of continuous travel on the back roads of Nova Scotia at a local Tim Hortons coffee shop. It was about 36 degrees Celcius (very hot) The parking lot and coffee shop were built on a hill and i parked beside another heavier bike, and as I was getting off the bike the side peg sunk a tad into the hot pavement. this combined with being on a slight grade over she went and on top of me she landed.
It happened fast, i had a buddy standing right there (fortunately) who grabbed the bike and prevented her from crushing my foot. I quickly scam,pered from underneath and the 2 of us righted the bike.
Its was a rather shocking experience TBH esp because it happened so fast.
Bottom line- the sliders prevented any damage from occurring. not a scratch anywhere on the bike-including the slider.
the only damage was to my confidence - but I chock that up as a valuable learning experience in the end.
Hope this helps- enjoy the sliders, they will look awesome once installed.
cheers!

I have the Moriwaki sliders and the ones you have look virtually identical.
here is some feedback for you.
I was on a long hot group ride last summer - we stopped after about 3 hours of continuous travel on the back roads of Nova Scotia at a local Tim Hortons coffee shop. It was about 36 degrees Celcius (very hot) The parking lot and coffee shop were built on a hill and i parked beside another heavier bike, and as I was getting off the bike the side peg sunk a tad into the hot pavement. this combined with being on a slight grade over she went and on top of me she landed.
It happened fast, i had a buddy standing right there (fortunately) who grabbed the bike and prevented her from crushing my foot. I quickly scam,pered from underneath and the 2 of us righted the bike.
Its was a rather shocking experience TBH esp because it happened so fast.
Bottom line- the sliders prevented any damage from occurring. not a scratch anywhere on the bike-including the slider.
the only damage was to my confidence - but I chock that up as a valuable learning experience in the end.
Hope this helps- enjoy the sliders, they will look awesome once installed.
cheers! Thanks jrns!

Sent from my VS990 using Tapatalk


RE: Moriwaki Skid Pads - hdvalente_imp - 12-17-2015

I chose these ones instead of Moriwaki because they are all black and seem a bit longer. Pictures and dimensions:










Below the part numbers for each item of the set. I am sure Mr. T can order them.

One can use the base part to mount a pair of highway pegs. They are really top quality.




RE: Moriwaki Skid Pads - quietguy_imp - 12-18-2015

They look beautiful, hdvalente. I added them to my personal "wish list". It will be on my nickel, no Santa here, just me, lol.


Moriwaki Skid Pads - Elipten_imp - 12-19-2015

Snow, ice. Sound like perfect conditions to put the sliders to a real world test!


Sent from my iPhone using Tapatalk


RE: Moriwaki Skid Pads - Retsel_imp - 12-19-2015

Thanks hdvalente!

Sent from my SM-T710 using Tapatalk


RE: Moriwaki Skid Pads - the Ferret - 12-19-2015

Hd, that is a coool measuring tape. I want one !


RE: Moriwaki Skid Pads - hdvalente_imp - 12-19-2015

(12-19-2015, 07:05 AM)The ferret_imp Wrote: Hd, that is a coool measuring tape. I want one !

http://www.amazon.com/gp/product/B015XON8DI

I got it about a month ago with $10 off. Now it is back to normal price but out of stock...


RE: Moriwaki Skid Pads - Retsel_imp - 12-19-2015

Thanks hdvalente! I put it in my cart.

Sent from my XT1096 using Tapatalk


RE: Moriwaki Skid Pads - hdvalente_imp - 02-10-2016

Just an update on the Sato Racing Frame Sliders.
They sent me an email yesterday that they are in stock in the US:

http://www.satoracing.com/framesliders_hondaCB1100.htm


RE: Moriwaki Skid Pads - jedd_imp - 02-11-2016

Any chance these, mounted like this:
[Image: 8a10cf3a9067627bf9d0c19db1136902.jpg]

can be used in conjunction w/ the SWM crash bars too?


(overkill, yes, but better to be safe than sorry...)