+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: Good news is they are done (/showthread.php?tid=9417)
RE: Good news is they are done - Papa Weeley_imp - 05-02-2014
Any shots of them on the bike?
RE: Good news is they are done - zachamo_imp - 05-02-2014
Hope we can see pictures on the bike! What distance does it offset the signal?
Re: RE: Good news is they are done - dBuster_imp - 05-02-2014
(05-02-2014, 03:35 AM)zachamo_imp Wrote: Hope we can see pictures on the bike! What distance does it offset the signal?
There are photos of the first set made on the thread I linked to but more directly here is the post..
http://cb1100forum.com/forum/showthread.php?pid=35826#pid35826
Granted these are not the exact same ones but they are the same specs. Since that was the thread that led to this one
Sent from my XT1055 using Tapatalk
Good news is they are done - Ridem32_imp - 05-02-2014
Looks nice. Should fit the 14 also?
Michael
Good news is they are done - Romo1969_imp - 05-02-2014
(05-01-2014, 04:51 PM)Ridem32_imp Wrote: That's a huge discount at $30 a pair. Is that $5,000.00 or have to order 5,000 pairs ? If it's $5,000.00 order how many pairs for $5,000.00 ?
Michael
5000 pairs. But that's just a random estimate.
Sent from my iPad using Tapatalk
Going to get them on in a few days. And address some of the questions posed here. Truth be told I thought about making them in a way to be applied to several styles of bikes and lights. So if I make many it would be feasible to have a broader based market to capture rather than a single niche market.
Sent from my iPad using Tapatalk
RE: Good news is they are done - flynrider - 05-02-2014
(05-02-2014, 08:46 AM)Romo1969_imp Wrote:(05-01-2014, 04:51 PM)Ridem32_imp Wrote: That's a huge discount at $30 a pair. Is that $5,000.00 or have to order 5,000 pairs ? If it's $5,000.00 order how many pairs for $5,000.00 ?
Michael
5000 pairs. But that's just a random estimate.
Sent from my iPad using Tapatalk
Going to get them on in a few days. And address some of the questions posed here. Truth be told I thought about making them in a way to be applied to several styles of bikes and lights. So if I make many it would be feasible to have a broader based market to capture rather than a single niche market.
Sent from my iPad using Tapatalk
That would be the only way to make volume production viable. There just aren't enough CB11s around to do it. On the bright side, it's a fairly simple product and that simplicity should be a positive factor when it comes to fitting this on other models. Now all you need is a bunch of friends with different bikes!
RE: Good news is they are done - Lord Popgun - 05-02-2014
So are we actually going to be able to get a set of these?
Not being a machinist or knowing anything about costing, can't a CNC machine make a lot of these pretty fast? Or is the cost in programming the CNC? Is it hard to program one?
RE: Good news is they are done - meowguy_imp - 05-02-2014
If I don't know what they are, then I certainly don't need them.
RE: Good news is they are done - Lord Popgun - 05-02-2014
Meowguy,
They are setbacks for the rear turn signals. That allows you to mount saddlebags without the lights being in the way.
RE: Good news is they are done - meowguy_imp - 05-02-2014
Thank you.