![]() |
|
Arrow Slip-on Question - Printable Version +- The CB1100 Community Forum (https://cb1100forum.net/forum) +-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5) +--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8) +--- Thread: Arrow Slip-on Question (/showthread.php?tid=9162) Pages:
1
2
|
RE: Arrow Slip-on Question - holy666diver_imp - 12-08-2016 (12-08-2016, 02:56 AM)The ferret_imp Wrote: Or just not worry about it. It's not going to fall off. Does it leak at the joint? Not sure if it's leaking how would I test that? RE: Arrow Slip-on Question - the Ferret - 12-08-2016 Listen for a leak, or put some soapy water around joint and see if it blows bubbles RE: Arrow Slip-on Question - Nemo_imp - 12-08-2016 Holy, I have an Arrow and it doesn't move that much. It seems like you may be missing the collar (No. 11 in the pic) that prevents that movement. RE: Arrow Slip-on Question - holy666diver_imp - 12-08-2016 (12-08-2016, 04:46 AM)Nemo_imp Wrote: Holy, Yes! I am missing that piece! Snap what site is that on? (12-08-2016, 04:46 AM)Nemo_imp Wrote: Holy, Am I supposed to use the gasket? I could get that to fit. RE: Arrow Slip-on Question - Nemo_imp - 12-08-2016 Click [url=http://www.partsfish.com/oemparts/a/hon/52f28c02f870021404ec5a46/exhaust-muffler-1]HERE I don't remember a gasket... If it's there, it never came out when I took off the factory muffler or when I had the headers finished. RE: Arrow Slip-on Question - holy666diver_imp - 12-08-2016 I fixed it! Thanks everyone for the help. I has the insert I had everything I needed just used the wrong exhaust clamp... I had to torque the new down a bit and now it's solid as a rock. I used my yoshimura clamp which maxed out before it was tight enough. Should be good now! RE: Arrow Slip-on Question - the Ferret - 12-08-2016 good deal! RE: Arrow Slip-on Question - Nemo_imp - 12-08-2016 |