![]() |
|
Horn Relocation - Printable Version +- The CB1100 Community Forum (https://cb1100forum.net/forum) +-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5) +--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8) +--- Thread: Horn Relocation (/showthread.php?tid=8727) |
RE: Horn Relocation - Lord Popgun - 07-24-2016 Email Mr. T. He might be able to get them. RE: Horn Relocation - AzBob_imp - 07-27-2016 Sound, being directional, means that your horns are a lot less effective now. I assume you knew that going in and are OK with it, but for me, I wouldn't be. The stock horns on the CB are quite loud (louder than a motorcycle generally has, IMO). A lady nearly crapped herself one time when she decided she was going to try to change lanes into the space I was already occupying. RE: Horn Relocation - Rolls_imp - 07-27-2016 (07-27-2016, 08:28 AM)AzBob_imp Wrote: Sound, being directional, means that your horns are a lot less effective now. I assume you knew that going in and are OK with it, but for me, I wouldn't be. The stock horns on the CB are quite loud (louder than a motorcycle generally has, IMO). A lady nearly crapped herself one time when she decided she was going to try to change lanes into the space I was already occupying.I agree with you on this, AzBob. Quote: A lady nearly crapped herself one time when she decided she was going to try to change lanes into the space I was already occupying. But that's the one case where I thought pointing 'em sideways might not hurt!
RE: Horn Relocation - beardyweirdy@me.com_imp - 07-27-2016 It depends who your warning... For me It's usually to tell pedestrians that are crossing on a red that your coming thru. Or to warn a cyclist I'm passing. In those cases they are to the front and side. Plenty loud enough and I've had bikes with horns on the side before. Those horns aren't very directional. RE: Horn Relocation - rodsmith123_imp - 07-28-2016 Really like the upgraded horns in the stock location. You guys are emptying my wallet with all the good suggestions. Thanks RE: Horn Relocation - jtopiso_imp - 06-11-2018 Let me resuscitate this thread to ask: Has anyone managed to relocate the horns on top of the oil-cooler? I'd like to remove some of the "bling" (17RS), and I'd like to hide a bit the shine of the horns from where it is. RE: Horn Relocation - peterbaron - 06-11-2018 (07-27-2016, 08:28 AM)AzBob_imp Wrote: Sound, being directional, means that your horns are a lot less effective now. I assume you knew that going in and are OK with it, but for me, I wouldn't be. The stock horns on the CB are quite loud (louder than a motorcycle generally has, IMO). A lady nearly crapped herself one time when she decided she was going to try to change lanes into the space I was already occupying. +1, safety first, appearance second pb RE: Horn Relocation - PowerDubs_imp - 06-11-2018 (06-11-2018, 07:24 PM)jtopiso_imp Wrote: Let me resuscitate this thread to ask: Easy enough- several people have put the '17 horns on their older bikes so have the smaller less blingy earlier horns probably sitting in a box. Make a post in the classifieds and ask for a set- or check Ebay. RE: Horn Relocation - jtopiso_imp - 06-12-2018 (06-11-2018, 11:33 PM)PowerDubs_imp Wrote:(06-11-2018, 07:24 PM)jtopiso_imp Wrote: Let me resuscitate this thread to ask: Easy enough- several people have put the '17 horns on their older bikes so have the smaller less blingy earlier horns probably sitting in a box. Make a post in the classifieds and ask for a set- or check Ebay. Do you know if they sound as loud on the older models as on the new ones? RE: Horn Relocation - 2017EX_imp - 06-12-2018 I think I would have to agree with some of the other comments here. Although it is a unique idea and look, the horns on motorcycles, cars, and sirens on emergency vehicles face forward for efficiency and safety reasons. As far as covering the original turn signal mounts are concerned, you could use an appropriate size black nylon hole filler cap similar to what I used in this thread for the hex hole in my front axle: http://www.cb1100forum.com/forum/showthread.php?tid=12737 You could also possibly use an appropriate size round reflector which would give a bit more visibility from the side at night. Either a reflector or a hole cap would give a clean look at minimal cost. Safety outweighs look for me every time. |