![]() |
|
2014 Std Modifications - Printable Version +- The CB1100 Community Forum (https://cb1100forum.net/forum) +-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5) +--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8) +--- Thread: 2014 Std Modifications (/showthread.php?tid=8725) |
2014 Std Modifications - Mtneers - 07-22-2018 (07-21-2018, 10:59 PM)mhicks17_imp Wrote: I'm sure you've covered before. What have been your top 3 to 4 modifications/upgrades on your '14 std. that a new owner should consider for comfort or convenience? (1) Seat upgrade (2) windscreen (3) luggage rack (4) engine guards Sent from my iPad using Tapatalk RE: 2014 Std Modifications - Retsel_imp - 07-22-2018 Yep, better view than stock as well. (07-22-2018, 12:54 AM)SportsterDoc_imp Wrote:(07-22-2018, 12:33 AM)Retsel_imp Wrote: I've done quite a few. I love to tinker. In order of improvement, for my riding style and use anyway; They look good! Sent from my SM-T710 using Tapatalk RE: 2014 Std Modifications - Townie_imp - 07-22-2018 (07-22-2018, 12:51 AM)Retsel_imp Wrote: Oh, almost forgot the most important. MEE M6 pro ear buds with Comply isolation ear bud tips. Love them. They eliminate noise, sound great, and fit well in a tight fitting helmet. Hey, they look interesting. I've been looking for a pair of low-profile ear buds that have the different types of tips so I can see what works best. These seem to check the boxes. Price of these is good too! RE: 2014 Std Modifications - Roper_imp - 07-22-2018 (07-22-2018, 02:34 AM)mhicks17_imp Wrote: This info. is spot-on, exactly what I was hoping for. I'm 6'0" with a 34" inseam. I really like the look of the standard seat. For me, it was uncomfortable after about an hour of riding. I ordered a Corbin seat with extra foam. It felt hard for the first few weeks. Now, I love it. I've been on several eight-hour plus rides. With a stop for gas and a stretch every two hours, it works. My legs get more uncomfortable than my backside does on long rides. RE: 2014 Std Modifications - LongRanger_imp - 07-22-2018 (07-22-2018, 02:34 AM)mhicks17_imp Wrote: This info. is spot-on, exactly what I was hoping for.Hicks, congrts on your '14, and welcome to the forum. I must pipe in and suggest that if you get sore after only 30 minutes of riding, something's wrong. I'd hate to think you need a Corbin to tolerate a half-hour ride. We're all shaped differently, but to me the stock CB seat is an all-day seat (riding solo). I'm 6'6", 36" inseam, 210 lbs. It may not be the consensus, but to me, for the way I ride, the bike is perfectly comfortable as is. Hope you find your sweet spot! 2014 Std Modifications - Retsel_imp - 07-22-2018 Actually, I was okay with the stock seat. I swapped for aesthetical rather than functional reasons. I wanted a tuck-n-roll look. I usually drive short distances. I'm 6 ft, 32" inseem. Sent from my Moto G (5) Plus using Tapatalk RE: 2014 Std Modifications - SportsterDoc - 07-22-2018 (07-22-2018, 05:53 AM)LongRanger_imp Wrote:(07-22-2018, 02:34 AM)mhicks17_imp Wrote: This info. is spot-on, exactly what I was hoping for.Hicks, congrts on your '14, and welcome to the forum. My 2003 XLH883 stock solo seat was only good for ~50 miles, as was the stock 2012 Bonneville seat. The V7II took some time to acquire the ability go all day (460 miles) For the CB1100, the same analysis as the V7II only more comfortable sooner. I have been 460 miles in a day on it, also. Stretch breaks come sooner towards the end of the day. Not saying I would not appreciate a Corbin, but stock is OK for me for an all day ride. Just takes some acclimation. (07-22-2018, 05:21 AM)Roper_imp Wrote:(07-22-2018, 02:34 AM)mhicks17_imp Wrote: This info. is spot-on, exactly what I was hoping for. Yep. If I am with friends and they are not ready for a break (usually refuel at about 100 miles), I just stretch one leg at a time and/or stand on the pages. RE: 2014 Std Modifications - Lord Popgun - 07-22-2018 AirHawk. Jus sayin
RE: 2014 Std Modifications - Retsel_imp - 07-22-2018 They came with the usual silicone tips and one medium Comply tip. The medium was to small for me, didn't block noise well and minimal bass response, I ordered the larger Complys. Made a big difference in bass and noise blocking. (07-22-2018, 04:46 AM)Townie_imp Wrote:(07-22-2018, 12:51 AM)Retsel_imp Wrote: Oh, almost forgot the most important. MEE M6 pro ear buds with Comply isolation ear bud tips. Love them. They eliminate noise, sound great, and fit well in a tight fitting helmet. Hey, they look interesting. I've been looking for a pair of low-profile ear buds that have the different types of tips so I can see what works best. These seem to check the boxes. Price of these is good too! Sent from my Moto G (5) Plus using Tapatalk RE: 2014 Std Modifications - Cormanus - 07-22-2018 (07-22-2018, 12:51 AM)Retsel_imp Wrote: Oh, almost forgot the most important. MEE M6 pro ear buds with Comply isolation ear bud tips. Love them. They eliminate noise, sound great, and fit well in a tight fitting helmet. How much noise do they keep out? Are they as good as noise cancelling headphones? (07-22-2018, 07:54 AM)Lord Popgun_imp Wrote: AirHawk. Jus sayin What popgun said. |