+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: INSTALLED: Rox Pivoting Riser 2" rise x 7/8 stem clamp x 7/8 " handlebar (/showthread.php?tid=8679)
Pages:
1
2
RE: INSTALLED: Rox Pivoting Riser 2" rise x 7/8 stem clamp x 7/8 " handlebar - decarmine_imp - 10-23-2018
(10-15-2018, 01:24 PM)Nortoon_imp Wrote:(10-14-2018, 02:47 AM)decarmine_imp Wrote:(10-14-2018, 01:56 AM)Nortoon_imp Wrote: I bought GenMar pull back risers because I am tall and like to ride sitting straight up. They raise the handlebars 1 inch up and 1 3/8ths back. They were easy to install. But they just leave enough slack in the cables and hoses.
If I have my tank bag full, it will sound the horn turning the bars to lock the bike. I seldom use the tank bag anymore, but learned to lock and unlock the bike with the ignition off to avoid any noisy embarrassment.
I like the idea of the "up a bit and back a bit..." Do you have a model number for the Genmars? Where did you get them -- ebay, Amazon? If you don't mind, how much were they?
Thanks
Frank
I bought them on Amazon, but you buy them directly from GenMar.
The GenMar part number for their [url=http://www.genmarmfg.com/shop/universal-risers/x102-detail.html]universal risers is X102. They are US$110.
Just click on the link to see the details.
I bought them on Amazon, but you buy them directly from GenMar.
The GenMar part number for their [url=http://www.genmarmfg.com/shop/universal-risers/x102-detail.html]universal risers is X102. They are US$110.
Just click on the link to see the details.
Thanks.
RE: INSTALLED: Rox Pivoting Riser 2" rise x 7/8 stem clamp x 7/8 " handlebar - Mandrau_imp - 10-24-2018
Thanks also Norton for the info. I think the GenMar might do nicely with a little up and back of the bars. They look beefier too. Let you know next riding season.