+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: Moriwaki rearsets (/showthread.php?tid=8244)
Pages:
1
2
RE: Moriwaki rearsets - j3gq_imp - 02-28-2021
@ all
more pictures please, and if you don't mind to support my laziness, could you please add part numbers, etc. even prices
(with and without customs and taxes) so we get the full picture. Did you encounter any difficulties during installation?
RE: Moriwaki rearsets - Houtman_imp - 02-28-2021
Would you like us to install them for you too ? ( just kidding )
RE: Moriwaki rearsets - Olof_imp - 03-01-2021
(02-28-2021, 03:31 AM)j3gq_imp Wrote: @ all
more pictures please, and if you don't mind to support my laziness, could you please add part numbers, etc. even prices
(with and without customs and taxes) so we get the full picture. Did you encounter any difficulties during installation?
Sorry, what pictures are you missing?
As mentioned, I got them via Webike Japan. A search on "Moriwaki rearsets" will get you there. The part no. is 05060-201P2-00. All the prices are there, including shipping.
Installing required one evening in the garage and not very much swearing (in my case the share of profanities are inversely related to the number of beers consumed - this time the fridge happened to be empty)
Tinkering like this makes you realise the high level of Honda workmanship - even under the seat and covers its beautifully finished and neatly packaged. This bike is such a keeper.
RE: Moriwaki rearsets - j3gq_imp - 03-03-2021
I am sorry Olof, you are right, it's all there but I had somehow missed it.
And when I said pictures, I should have said drawings which allow me to see what can be adjusted and to what extent.
Anyway, thanks again, looks great !
RE: Moriwaki rearsets - Olof_imp - 03-03-2021
(03-03-2021, 07:00 PM)j3gq_imp Wrote: I am sorry Olof, you are right, it's all there but I had somehow missed it.
And when I said pictures, I should have said drawings which allow me to see what can be adjusted and to what extent.
Anyway, thanks again, looks great !
Ok then I understand. There are two adjustment possibilities on each side. First, the foot pegs can be mounted in two different positions - identical with stock or 20 mm higher. Second, the brake and gear lever "end pegs" (sorry I dont know the term) can be mounted in two different positions - at the very ends, which sort of equals stock, or some 20 mm in (I never measured this). These "end pegs" come mounted at the very end and I never touched them. The brake side feels same-same but the shift feels more distinct and with shorter throws. On top of these two adjustment possibilities you of course have the stock adjustment possibility for the vertical position of the gear lever. With the Moriwakis the gear lever can be set lower before running out of thread.