+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Mechanical & Technical (https://cb1100forum.net/forum/forumdisplay.php?fid=7)
+--- Thread: Dyno'ed the stock bike today (/showthread.php?tid=6227)
Pages:
1
2
RE: Dyno'ed the stock bike today - 2013 CBXX_imp - 07-27-2013
No, not really, just unplug black wire from speed sensor
on rear caliper and it is disconnected. So is speedo/odo.
RE: Dyno'ed the stock bike today - Deanohh_imp - 08-03-2013
Look at the wiring diagram. There are 2 voltage wires direct from the rear speed sensor to the Speedo. Then there is 1 speed wire coming out of the cluster and straight to the ecu. I don't know if the ecu needs to know road speed for its fuel maps or if it would cause a code if it were disconnected. That wire could be the key to it but I'm not willing to take stuff apart enough to find out.