+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Mechanical & Technical (https://cb1100forum.net/forum/forumdisplay.php?fid=7)
+--- Thread: 8 k mile check (/showthread.php?tid=6192)
Pages:
1
2
RE: 8 k mile check - rboe - 10-11-2013
Good chance I'll be retired by the time my bikes needs that so I'll have to do it myself instead of paying someone. Funny how life does that.
RE: 8 k mile check - enzo_imp - 10-11-2013
I am no where near that kind of service. But would like to do it myself when it comes around,
and of course have available all necessary tools, manual, full beer fridge, and of course the mandatory brown paper bag to swear in.
RE: 8 k mile check - cbfan_imp - 10-12-2013
Funny, I'm a retired aircraft tech and after over 40 years of turning wrenches I just don't have it in me anymore to get into heavy maintenance. I like to do little mods to make the bike mine and normal maintenance but the hard stuff that you have to think about...............
RE: 8 k mile check - furious_blue_imp - 10-12-2013
The 8K valve inspection is why I knew going into this that the CB1100 wasn't going to be a long-haul trip bike for me. The other shim under bucket bikes that I had, had much longer valve inspection intervals and that was more livable while racking up mileage figures.. The Speed Triple that I sold to get the CB1100 was just past it's 12,000 mile valve inspection time. I told the buyer about that and gave him a cheaper price because of it (he loves serious home wrenching so it was not an issue for him !).
RE: 8 k mile check - the Ferret - 10-12-2013
(10-12-2013, 02:46 AM)furious_blue_imp Wrote: The 8K valve inspection is why I knew going into this that the CB1100 wasn't going to be a long-haul trip bike for me. The other shim under bucket bikes that I had, had much longer valve inspection intervals and that was more livable while racking up mileage figures.. The Speed Triple that I sold to get the CB1100 was just past it's 12,000 mile valve inspection time. I told the buyer about that and gave him a cheaper price because of it (he loves serious home wrenching so it was not an issue for him !).
I understand where you are coming from. The valve inspection interval on my 125 hp, 14,000 rpm FZ-1 was every 26,000 miles. Why the huge difference? Oh well, it is what it is.
At my current rate of racking up miles it looks like a set of tires and a valve inspection after every riding season.
RE: 8 k mile check - furious_blue_imp - 10-12-2013
(10-12-2013, 03:35 AM)The ferret_imp Wrote:(10-12-2013, 02:46 AM)furious_blue_imp Wrote: The 8K valve inspection is why I knew going into this that the CB1100 wasn't going to be a long-haul trip bike for me. The other shim under bucket bikes that I had, had much longer valve inspection intervals and that was more livable while racking up mileage figures.. The Speed Triple that I sold to get the CB1100 was just past it's 12,000 mile valve inspection time. I told the buyer about that and gave him a cheaper price because of it (he loves serious home wrenching so it was not an issue for him !).
I understand where you are coming from. The valve inspection interval on my 125 hp, 14,000 rpm FZ-1 was every 26,000 miles. Why the huge difference? Oh well, it is what it is.
At my current rate of racking up miles it looks like a set of tires and a valve inspection after every riding season.
That's a loooong interval. Had me wondering... I verified (as much as you can on the internet). that the FZ-1 has the 'genesis' 5 valve heads. If that's true, then I could imagine that with 5 valves they are individually lighter than if there were 4. So maybe lighter means less stress and less wear and tear (but more labor to perform when it comes time to check them)..
RE: 8 k mile check - AzBob_imp - 10-15-2013
(10-11-2013, 06:39 AM)HikerToo_imp Wrote: I used to do valve adjustments on my 900 Ninja, but the cams did not need to come out.....back then, I was younger, poorer and more determined....so for the CB1100 I may pay the shop, but may wait until 10K before I do.
You only need to remove the cams on the CB if you need to change out any of the shims. You don't need to remove them to simply do the inspection.
RE: 8 k mile check - HikerToo_imp - 10-15-2013
Good to know AzBob, , then I can take the time to inspect for my peace of mind, and make decision to go further if I find any out of tolerance.
Thanks!