+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Mechanical & Technical (https://cb1100forum.net/forum/forumdisplay.php?fid=7)
+--- Thread: Heated Grips End Caps (/showthread.php?tid=6150)
Pages:
1
2
RE: Heated Grips End Caps - AzBob_imp - 12-20-2013
(12-19-2013, 08:27 AM)GaryRudolph_imp Wrote: They are about the same hardness/design as the stock.
Bleh. And they're unbelievably expensive. ~$350 for the two kits required. Gack. I may end up buying them anyway. :-D
Heated Grips End Caps - IndianRider_imp - 01-12-2014
Hello, where do you plug in the heated grips ? Is there an accessory outlet ? If so, what type of plug it connector is it ? Can you post a pic ?
I'm have my heated jacket installed directly to the battery and would like to install it to a switched outlet so I don't drain the battery if I forget to switch off the accessory
Thanks
Sent from my iPhone using [url=http://tapatalk.com/m?id=1]Tapatalk
RE: Heated Grips End Caps - GaryRudolph_imp - 01-12-2014
They have a module that connects inline. It's not something that is easily usable for a heated jacket. I think you're better finding a switched source and wiring in a relay.
RE: Heated Grips End Caps - AzBob_imp - 01-14-2014
(01-12-2014, 01:10 PM)IndianRider_imp Wrote: Hello, where do you plug in the heated grips ? Is there an accessory outlet ? If so, what type of plug it connector is it ? Can you post a pic ?
I'm have my heated jacket installed directly to the battery and would like to install it to a switched outlet so I don't drain the battery if I forget to switch off the accessory
Thanks
Sent from my iPhone using [url=http://tapatalk.com/m?id=1]Tapatalk
There's a complete wiring harness for the grips that connects to the bike's wiring; it's not something you could really hook anything else up to.
Don't you have to disconnect from the bike to get off of it? How could you forget that?