+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: General Discussion (https://cb1100forum.net/forum/forumdisplay.php?fid=6)
+--- Thread: Bike almost done... (/showthread.php?tid=536)
RE: Bike almost done... - Vic_imp - 09-24-2021
love gold wheels. had em once and always love the look.
RE: Bike almost done... - GoldOxide_imp - 09-24-2021
(09-24-2021, 09:38 PM)Vic_imp Wrote: love gold wheels. had em once and always love the look.
(+1) I would have to agree Vic.
RE: Bike almost done... - Nachodaddy - 09-25-2021
That is a seriously beautiful bike. A lot of good ideas there. Thanks
RE: Bike almost done... - Phadreus_imp - 09-25-2021
Outstanding, thanks for sharing that beaut with us!
Can you tell us about the rear cowl? Did you make it, or buy it?
I too like the look of the gold wheels. I feel like it needs a splash of gold somewhere else to ties it all together, but don't have any real suggestions. Nothing to hate about the way it is now for sure.
RE: Bike almost done... - pdedse - 09-25-2021
(09-24-2021, 09:14 PM)nsrrider_imp Wrote:Prineville....(09-24-2021, 01:56 PM)PowerDubs_imp Wrote: I don't like my stock tank- but on your bike- with your tail - it works great!!All good points.....the Rizoma signals are there.....I might remove the headlight brackets and either paint or powder coat them satin black.....the muffler...I hate to go smaller as that typically means louder....but I'm open to something different too. And really good point: the front fender needs to be black!
My only big thoughts- to me- your muffler is too big- and those elongated brackets moving the headlight forward gotta go!!
Little thoughts- black front fender...and where are the blinkers?
(09-24-2021, 02:37 PM)pdedse_imp Wrote: Lookin' Good!!! Where at in Central OR?Prineville....
(09-24-2021, 05:43 PM)tod.branko_imp Wrote: I also like it in general, curious to know what kind of mod you did to the subframe, maybe you could elaborate on that a little, and thank you for giving me a chance to see what wheels in gold look like because I was thinking about doing it. The front od a bit odd though, I feel like the headlight sits a bit high, reminds me of the RE Himalayan like that. Could be just an optical illusion idk
'14 CB1100 STD 5 speed
No sub-frame mods.....I just removed (cut off) the back half of the rear fender and tail light assembly.
That's funny, I just road through there on a trip out to Hart, Mt., eastern OR area on my KLR. I love the riding around your area.
RE: Bike almost done... - nsrrider_imp - 09-25-2021
(09-25-2021, 12:43 AM)Phadreus_imp Wrote: Outstanding, thanks for sharing that beaut with us!
Can you tell us about the rear cowl? Did you make it, or buy it?
I too like the look of the gold wheels. I feel like it needs a splash of gold somewhere else to ties it all together, but don't have any real suggestions. Nothing to hate about the way it is now for sure.
The rear cowl was a Honda OEM option for a VFR800 (used off EBAY). The two sides and rear of the cowl had to be deepened a couple of inches with fiber glass to cover the CB1100 seat, and the profile of the front had to be altered to fit the also fit the contour of the CB seat....a little filler and paint to finish.
(09-25-2021, 12:47 AM)pdedse_imp Wrote:Prineville....(09-24-2021, 09:14 PM)nsrrider_imp Wrote:Prineville....(09-24-2021, 01:56 PM)PowerDubs_imp Wrote: I don't like my stock tank- but on your bike- with your tail - it works great!!All good points.....the Rizoma signals are there.....I might remove the headlight brackets and either paint or powder coat them satin black.....the muffler...I hate to go smaller as that typically means louder....but I'm open to something different too. And really good point: the front fender needs to be black!
My only big thoughts- to me- your muffler is too big- and those elongated brackets moving the headlight forward gotta go!!
Little thoughts- black front fender...and where are the blinkers?
(09-24-2021, 02:37 PM)pdedse_imp Wrote: Lookin' Good!!! Where at in Central OR?Prineville....
(09-24-2021, 05:43 PM)tod.branko_imp Wrote: I also like it in general, curious to know what kind of mod you did to the subframe, maybe you could elaborate on that a little, and thank you for giving me a chance to see what wheels in gold look like because I was thinking about doing it. The front od a bit odd though, I feel like the headlight sits a bit high, reminds me of the RE Himalayan like that. Could be just an optical illusion idk
'14 CB1100 STD 5 speed
No sub-frame mods.....I just removed (cut off) the back half of the rear fender and tail light assembly.
That's funny, I just road through there on a trip out to Hart, Mt., eastern OR area on my KLR. I love the riding around your area.
That's funny, I just road through there on a trip out to Hart, Mt., eastern OR area on my KLR. I love the riding around your area.
Yeah, we got some excellent dual sporting around here.....I've got a couple of DS bikes that I enjoy....
RE: Bike almost done... - PowerDubs_imp - 09-25-2021
(09-24-2021, 09:14 PM)nsrrider_imp Wrote:(09-24-2021, 01:56 PM)PowerDubs_imp Wrote: I don't like my stock tank- but on your bike- with your tail - it works great!!All good points.....the Rizoma signals are there.....I might remove the headlight brackets and either paint or powder coat them satin black.....the muffler...I hate to go smaller as that typically means louder....but I'm open to something different too. And really good point: the front fender needs to be black!
My only big thoughts- to me- your muffler is too big- and those elongated brackets moving the headlight forward gotta go!!
Little thoughts- black front fender...and where are the blinkers?
(09-24-2021, 02:37 PM)pdedse_imp Wrote: Lookin' Good!!! Where at in Central OR?Prineville....
(09-24-2021, 05:43 PM)tod.branko_imp Wrote: I also like it in general, curious to know what kind of mod you did to the subframe, maybe you could elaborate on that a little, and thank you for giving me a chance to see what wheels in gold look like because I was thinking about doing it. The front od a bit odd though, I feel like the headlight sits a bit high, reminds me of the RE Himalayan like that. Could be just an optical illusion idk
'14 CB1100 STD 5 speed
No sub-frame mods.....I just removed (cut off) the back half of the rear fender and tail light assembly.
https://www.ebay.com/itm/233939981145?hash=item3677e8d359%3Ag%3AVAQAAOSwvtxgWXAL&LH_ItemCondition=4
RE: Bike almost done... - nsrrider_imp - 09-25-2021
(09-25-2021, 04:12 AM)PowerDubs_imp Wrote:thanks for the link but that's a lot of money. I think I'll paint it black with the color matched striping.(09-24-2021, 09:14 PM)nsrrider_imp Wrote:(09-24-2021, 01:56 PM)PowerDubs_imp Wrote: I don't like my stock tank- but on your bike- with your tail - it works great!!All good points.....the Rizoma signals are there.....I might remove the headlight brackets and either paint or powder coat them satin black.....the muffler...I hate to go smaller as that typically means louder....but I'm open to something different too. And really good point: the front fender needs to be black!
My only big thoughts- to me- your muffler is too big- and those elongated brackets moving the headlight forward gotta go!!
Little thoughts- black front fender...and where are the blinkers?
(09-24-2021, 02:37 PM)pdedse_imp Wrote: Lookin' Good!!! Where at in Central OR?Prineville....
(09-24-2021, 05:43 PM)tod.branko_imp Wrote: I also like it in general, curious to know what kind of mod you did to the subframe, maybe you could elaborate on that a little, and thank you for giving me a chance to see what wheels in gold look like because I was thinking about doing it. The front od a bit odd though, I feel like the headlight sits a bit high, reminds me of the RE Himalayan like that. Could be just an optical illusion idk
'14 CB1100 STD 5 speed
No sub-frame mods.....I just removed (cut off) the back half of the rear fender and tail light assembly.
https://www.ebay.com/itm/233939981145?hash=item3677e8d359%3Ag%3AVAQAAOSwvtxgWXAL&LH_ItemCondition=4
https://www.ebay.com/itm/233939981145?hash=item3677e8d359%3Ag%3AVAQAAOSwvtxgWXAL&LH_ItemCondition=4
RE: Bike almost done... - dave - 09-25-2021
The rear cowl was a Honda OEM option for a VFR800 (used off EBAY). The two sides and rear of the cowl had to be deepened a couple of inches with fiber glass to cover the CB1100 seat, and the profile of the front had to be altered to fit the also fit the contour of the CB seat....a little filler and paint to finish.
You did a beautiful job on that rear cowl - very professional looking. Actually, you did a beautiful job on the entire bike. Did you use a rattle can? What brand?
RE: Bike almost done... - PowerDubs_imp - 09-25-2021
Painting over chrome might not adhere well? No idea- never tried it...but seems like it might not.