+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Mechanical & Technical (https://cb1100forum.net/forum/forumdisplay.php?fid=7)
+--- Thread: torque specs? (/showthread.php?tid=5009)
RE: torque specs? - Flashman_imp - 08-02-2013
Hey Forum founder, and moderator,
A huge copyright violation in this thread. It's on your site and you are not going to do anything about it? Not even delete it?
Your defense that you didn’t know ends here.
Some guy buys a 12000 USD M/C and can’t afford a manual? WTF?
Mike
RE: torque specs? - Guth_imp - 08-04-2013
Mike,
I looked into things and removed the copyrighted material accordingly – sorry guys, but scans of the manual or other copyrighted material are off limits here.
As for your post, if you were really concerned about copyright infringement (which I do respect), a PM would have been a better choice as there is no guarantee that either ferret or myself will review every single thread here. So thanks for the warning, but next time I could definitely do without the attitude.
Guth
RE: torque specs? - meowguy_imp - 08-05-2013
In this case, I am proud to be a member of this forum that would have me as a member.
RE: torque specs? - the Ferret - 08-05-2013
We could tell someone a value if they ask, we just can't show copied pages from copyrighted materials.
RE: torque specs? - dailyrider_imp - 08-07-2013
(08-05-2013, 11:11 AM)The ferret_imp Wrote: We could tell someone a value if they ask, we just can't show copied pages from copyrighted materials.
Ferrets right, the specs are not copyrighted. The manual is. If anyone needs manual info just pm me.
RE: torque specs? - WKINNJ_imp - 08-09-2013
(08-04-2013, 02:55 PM)Guth_imp Wrote: Mike,Well Said!
I looked into things and removed the copyrighted material accordingly – sorry guys, but scans of the manual or other copyrighted material are off limits here.
As for your post, if you were really concerned about copyright infringement (which I do respect), a PM would have been a better choice as there is no guarantee that either ferret or myself will review every single thread here. So thanks for the warning, but next time I could definitely do without the attitude.
Guth
RE: torque specs? - zachamo_imp - 05-03-2014
Can someone tell me the motor mount torque specs? I am installing the SW Motech crash bars on a 2013.
RE: torque specs? - Tyke57nz_imp - 05-03-2014
(05-03-2014, 06:29 AM)zachamo_imp Wrote: Can someone tell me the motor mount torque specs? I am installing the SW Motech crash bars on a 2013.
Tyke57nz Wrote:
(12-26-2013 03:19 AM)Kiwikevin Wrote: Hi Tyke57NZ
Torques for the 4X "through frame" bolts / nuts is 49Nm.
I got my manual from here http://www.sell.com/2G7335
Hi Kiwikevin
Thanks for that info, I assumed the 2 x through bolts for the Engine to mounting plate would be the same, would you mind looking those up for me. I will have to set up a Pay Pal account to purchase that manual but I will get onto that later.
Where in NZ are you?
Cheers
Yes torques are the same for the 4 bolts that go through the frame. The other 2 (1 each side) that go through the front engine bracket/s are 59Nm.
Hope this helps.
RE: torque specs? - spartanheed_imp - 03-04-2019
Is there a list anywhere of all of the torque settings for the CB1100?
The numbers aren't copyrighted
RE: torque specs? - peterbaron - 03-05-2019
(03-04-2019, 11:49 PM)spartanheed_imp Wrote: Is there a list anywhere of all of the torque settings for the CB1100?
The numbers aren't copyrighted
Some time ago somebody already inquired about this torque, I am at work now and have no access to my service manual....perhaps other members?? or wait till pm, sorry