+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Mechanical & Technical (https://cb1100forum.net/forum/forumdisplay.php?fid=7)
+--- Thread: Rattle when going over bumps. (/showthread.php?tid=4800)
Pages:
1
2
RE: Rattle when going over bumps. - gman_imp - 06-10-2020
(06-08-2020, 11:51 PM)cheddarcheese_imp Wrote: I've searched and can't seem to find this specific issue (only discussion about RPM-specific buzzing).
Basically any time I go over a harsh bump, drop down out of my driveway, etc., there is a pretty loud rattling noise coming from the front portion of the bike.
At first I thought it may have been my tool kit (I have a few extra things in there) above the battery, but the problem persists when riding without it. It could be coming from the dash, but it's hard to isolate when you're at speed with a helmet on, and it does seem to be from somewhere lower.
I can't seem to replicate the noise by banging on anything (gauges, horns, headlight, oil cooler, etc.).
Anyone had this issue? Is this just part of the gauges being soft-mounted?
As I recently turned 64, I thought the occasional rattle I heard going over bumps was just, me>>>>>>>>>>>>>
RE: Rattle when going over bumps. - peterbaron - 06-10-2020
(06-10-2020, 05:03 AM)gman_imp Wrote:(06-08-2020, 11:51 PM)cheddarcheese_imp Wrote: I've searched and can't seem to find this specific issue (only discussion about RPM-specific buzzing).
Basically any time I go over a harsh bump, drop down out of my driveway, etc., there is a pretty loud rattling noise coming from the front portion of the bike.
At first I thought it may have been my tool kit (I have a few extra things in there) above the battery, but the problem persists when riding without it. It could be coming from the dash, but it's hard to isolate when you're at speed with a helmet on, and it does seem to be from somewhere lower.
I can't seem to replicate the noise by banging on anything (gauges, horns, headlight, oil cooler, etc.).
Anyone had this issue? Is this just part of the gauges being soft-mounted?
As I recently turned 64, I thought the occasional rattle I heard going over bumps was just, me>>>>>>>>>>>>>
As I recently turned 64, I thought the occasional rattle I heard going over bumps was just, me>>>>>>>>>>>>>
RE: Rattle when going over bumps. - cheddarcheese_imp - 06-11-2020
Did a little cleaning up in the headlight housing, the problem is improved I think, but certainly still present. Any ideas what else it could be? Anything on the bike that I grab seems to be bolted on tight . . .
RE: Rattle when going over bumps. - Cormanus - 06-12-2020
It's not your taillight, is it?
RE: Rattle when going over bumps. - cheddarcheese_imp - 06-14-2020
Well I re-opened the headlight and literally stuffed it with mini bubble-wrap.
In between every set of wires as well as in between those wires and the housing itself.
That seems to have taken care of it. Very odd, anyone who's opened the headlight can attest that things seem pretty well secured in there from the factory, and yet they need more padding!
RE: Rattle when going over bumps. - Inhouse Bob - 06-15-2020
(06-14-2020, 11:33 PM)cheddarcheese_imp Wrote: Well I re-opened the headlight and literally stuffed it with mini bubble-wrap.Yeah, things bounce around in there. It is interesting, though, how much they are able to hind in that little space.
In between every set of wires as well as in between those wires and the housing itself.
That seems to have taken care of it. Very odd, anyone who's opened the headlight can attest that things seem pretty well secured in there from the factory, and yet they need more padding!