![]() |
|
Helmet lock unusable? - Printable Version +- The CB1100 Community Forum (https://cb1100forum.net/forum) +-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5) +--- Forum: General Discussion (https://cb1100forum.net/forum/forumdisplay.php?fid=6) +--- Thread: Helmet lock unusable? (/showthread.php?tid=3250) |
RE: Helmet lock unusable? - flynrider - 03-16-2014 I posted about having trouble using the helmet lock last year. My modular has to have the chin section raised to be able to get it on the lock. With time it has become a bit easier, but it's still somewhat awkward. One tip about the helmet lock : Don't leave the key in the lock. The length of the key and the position of the lock are such that you'll bend or break the key off with your leg if you try to put the bike up on the center stand. I'm not the only one who has managed to do this
RE: Helmet lock unusable? - kevbroce_imp - 03-16-2014 (03-16-2014, 04:17 PM)shdwghst457_imp Wrote:(03-16-2014, 01:09 PM)kevbroce_imp Wrote: I use the helmet lock all the time with my Shoei RF-1100. It's a little tight, but not awful. There's basically 2 way you can go about it, you can have the left side of the helmet facing up, or the right side. On my Shoei, the D rings on the left side, I usually attach the helmet with the left side facing up towards the seat. Yeah, anyone looking at a helmet attached to a bike there would assume its securely locked in place. Might be easy to just strap it in place like you're saying. RE: Helmet lock unusable? - Cormanus - 03-16-2014 It's not the easiest lock, but I can make it work by twisting the helmet around as I put it on. Don't forget there is another hook under the seat that can be used to lock a helmet to the bike. RE: Helmet lock unusable? - Pterodactyl_imp - 03-16-2014 (03-16-2014, 04:55 PM)Flynrider_imp Wrote: I posted about having trouble using the helmet lock last year. My modular has to have the chin section raised to be able to get it on the lock. With time it has become a bit easier, but it's still somewhat awkward. Flynrider - very true. I have bent my key in exactly that manner. I should have added that to my "how to install OEM rack" post. A whack with a ball peen hammer fixed it but I can see worse outcomes. Cheers. RE: Helmet lock unusable? - Houtman_imp - 03-16-2014 I have always used a helmet lock extension,it is like a T,very cheap and usefull. RE: Helmet lock unusable? - redbirds_imp - 03-16-2014 I have a couple of these and they work fine. http://www.whitehorsegear.com/whitehorse-gear-helmet-lock-extension RE: Helmet lock unusable? - pechorin75_imp - 03-16-2014 Huh...I didn't know such a thing as a helmet lock extension even existed. Might have to look into that, or the license plate setup Ferret has. Although it sounds like I need to give the RS-1 another shot....at least one person reports getting his attached. Thanks for the advice, guys! RE: Helmet lock unusable? - mininsx_imp - 03-17-2014 I had the same problem with the helmet lock and I bought a couple of these from my dealer. Problem solved. https://www.denniskirk.com/mc-enterprises/helmet-lock-extensions.p329204.prd/329204.sku Helmet lock unusable? - Cormanus - 03-17-2014 I have one of these with the cable. It's really handy, particularly for locking my jacket to the bike for short periods. It's too hot here most of the time to wear it except on the bike. http://www.helmetlok.com RE: Helmet lock unusable? - rboe - 03-17-2014 I flipped the shield open, put my hand in there and the D ring was easy peasy to put on the hook. Not sure if that will you folks but it's worth a try. |