+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: General Discussion (https://cb1100forum.net/forum/forumdisplay.php?fid=6)
+--- Thread: removing tank stickers (/showthread.php?tid=2470)
RE: removing tank stickers - Lord Popgun - 05-10-2013
Well, they are tacky, but I'll take them if they help avoid a rear ender. I'm still thinking about adding a flashing brake light of some sort.
RE: removing tank stickers - jmc1100_imp - 05-11-2013
Yep hair dryer worked, Prepsol for remaining adhesive, coat of wax=more shiney red paint Thanks
RE: removing tank stickers - jsinher3_imp - 04-03-2016
Has anyone tried removing the pinstripes from the tank? I would like to remove mines
RE: removing tank stickers - LongRanger_imp - 04-03-2016
My bike didn't come with those stickers. I need to buy a set. I'd prefer to hang on to that "new car feeling" for as long as possible!
RE: removing tank stickers - uscgmac_imp - 04-03-2016
(04-03-2016, 03:24 AM)jsinher3_imp Wrote: Has anyone tried removing the pinstripes from the tank? I would like to remove mines
Dont think thats possible. And why would you?
RE: removing tank stickers - jerrycon_imp - 04-03-2016
I didn't use anything other than my fingernails to get the peeling started. Came right off. Maybe a bit of residue that I got rid of with Honda Cleaner Polisher.
RE: removing tank stickers - flynrider - 04-03-2016
(04-03-2016, 03:24 AM)jsinher3_imp Wrote: Has anyone tried removing the pinstripes from the tank? I would like to remove mines
They're painted on the tank. Not removable.
RE: removing tank stickers - Lord Popgun - 04-03-2016
They are actually decals that are clear coated over. They are available and shown in the MARK section of the parts fiche.
RE: removing tank stickers - Supervillian_imp - 04-03-2016
Hand held hair dryer worked fine for me. As mentioned, keep it moving and test the decals gently with your fingernail until the glue is soft enough to peel away. Sometimes you can get the edges peeled off but have to give the center of the decal extra heat to soften that up. Works great.
RE: removing tank stickers - Rocky_imp - 04-03-2016
(04-03-2016, 10:12 PM)Supervillian_imp Wrote: Hand held hair dryer worked fine for me. As mentioned, keep it moving and test the decals gently with your fingernail until the glue is soft enough to peel away. Sometimes you can get the edges peeled off but have to give the center of the decal extra heat to soften that up. Works great.
Exactly how I did it.
I cleaned off any residue with a mild solvent and then finished with some regular car polish.
As long as the stickers stay in good condition you can leave them on if that's what you want to do, but if they deteriorate and are eventually removed the pristine paint under the stickers will be in pretty sharp contrast to the slightly faded paint of the tank.
That's why most of us get rid of them right away.
OTOH, you could buy a set of new stickers and replace them if the old ones fail over time.
I suppose it all depends on how long you intend to keep the bike and if it's exposed to a lot of sun.
I'm the epitome of anal
when it comes to my "toys" so my bikes are always inside and out of the sun except when I'm out on the road.