![]() |
|
HOW OEM IS YOUR CB ? - Printable Version +- The CB1100 Community Forum (https://cb1100forum.net/forum) +-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5) +--- Forum: General Discussion (https://cb1100forum.net/forum/forumdisplay.php?fid=6) +--- Thread: HOW OEM IS YOUR CB ? (/showthread.php?tid=1149) |
RE: HOW OEM IS YOUR CB ? - Vic_imp - 02-11-2019 pretty much OEM. a seat cover, top case, windshield, grips and bar end weights. oh, taped wheels.
RE: HOW OEM IS YOUR CB ? - Cormanus - 02-11-2019 Vic, the website your photo is hosted on doesn't allow a hot link, at least to that picture. RE: HOW OEM IS YOUR CB ? - tommymck - 02-11-2019 (02-11-2019, 07:50 AM)peterbaron_imp Wrote: Just for fun and look, no competition and no winner will be declared. Since you mentioned tank..... For me, it was mainly a visual mod, but the 18+ liter tank really has added to the utility of the bike... ![]() The seat was also a major upgrade in my opinion ![]() And finally, the tourmaster bags are fantastic...
RE: HOW OEM IS YOUR CB ? - Cormanus - 02-11-2019 tommymck, that's a CB750 with an 1100cc mill! RE: HOW OEM IS YOUR CB ? - Randy B - 02-11-2019 (02-11-2019, 08:25 AM)Randy B_imp Wrote: Factory JDM 2011 dark blue tank I forgot to add the black peg plates from a 2014. RE: HOW OEM IS YOUR CB ? - GoldOxide_imp - 02-11-2019 (02-11-2019, 09:12 AM)peterbaron_imp Wrote:(02-11-2019, 08:23 AM)GoldOxide_imp Wrote:(02-11-2019, 07:50 AM)peterbaron_imp Wrote: Just for fun and look, no competition and no winner will be declared. PB: I think you forgot the seat towel. Heh, but I don't understand.
RE: HOW OEM IS YOUR CB ? - GoldOxide_imp - 02-11-2019 (02-11-2019, 09:27 AM)Guth_imp Wrote: Some bike models have "bad angle shots". I don't think there is a bad angle shot on the CB1100. Your image, Guth, is one of the best angles. I agree that the carrier does impede its beauty. RE: HOW OEM IS YOUR CB ? - Rocky_imp - 02-11-2019 (02-11-2019, 09:05 AM)Cormanus_imp Wrote: Rocky, where did you get the magnetic tank pads? ![]() I bought the magnetic sheets from mag-knight.com in the U.S. and cut them from a pattern somebody posted here a couple of years ago. Oh yes, I forgot to mention in my first post that I replaced the side covers with a matching painted set from Mr. T. I didn't have them when this picture was taken a couple of years ago, but they can be seen in my original post. RE: HOW OEM IS YOUR CB ? - Vic_imp - 02-11-2019 used to link pics from there.
RE: HOW OEM IS YOUR CB ? - GoldOxide_imp - 02-11-2019 (02-11-2019, 09:23 PM)Vic_imp Wrote: Thanks Vic. However I get: Error 1011 Ray ID: xxxxxxxxxxx • 2019-02-12 12:03:44 UTC Access denied What happened? The owner of this website (http://www.picturelongmont.com) does not allow hotlinking to that resource (/plcontent/atCrockersOct2017.png). |