+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: Lowering footpegs and bars pics (/showthread.php?tid=10261)
Pages:
1
2
Lowering footpegs and bars pics - Elipten_imp - 05-31-2014
Excellent share! Thanks
Sent from my iPad using Tapatalk
RE: evryone loves pics - Tyke57nz_imp - 05-31-2014
(05-31-2014, 12:18 AM)cosmos_imp Wrote: I have the Arrow slip on exhaust. It comes with a removable baffle, which I removed, and I think it's the 2nd best sounding exhaust right behind pipemasters 4 into 4. That whole money thing again. This thread convinced me, and I think it sounds even better in person
http://cb1100forum.com/forum/showthread.php?tid=1879
I know about the foot dragging, I have size 16 feet! The only time I drag is when shifting and turning left, when just pulling away from a stop, so I just have to keep that in mind. If I'm not shifting or braking I have the balls of my feet on the pegs so no problems.
The pegs are knight design
http://www.knightdesignllc.com/Products/Motorcycle/Honda/CB/Honda_CB1100_Foot_Pegs.html
and a pic of left side
[/img]
Thanks for that.
RE: Lowering footpegs and bars pics - Buffalorider_imp - 05-31-2014
Cosmo, I really like the look and position of those bars. Any chance you can post a few better pics on the install and some product info?
RE: Lowering footpegs and bars pics - furious_blue_imp - 06-01-2014
Nicely done. Kind of reminds of the 'stock cafe' look that the CB400F had for a while (only needs some chrome buttons along the seat edge if one were going for that :-) )
RE: Lowering footpegs and bars pics - cosmos_imp - 06-02-2014
(05-31-2014, 04:39 PM)Buffalorider_imp Wrote: Cosmo, I really like the look and position of those bars. Any chance you can post a few better pics on the install and some product info?
the video on the first page tells all I know about them, that's the same place I got them from. I didn't take any install pics, this is the first motorcycle I've worked on and I was trying to figure out what to do. I think if you knew what you're doing it might take an hour or two, took me a bit longer. Basic tools, shop manual,google, youtube, and a helper(who also doesn't know motorcycles).The good news is I did figure it out, so no rocket science here
RE: Lowering footpegs and bars pics - Gumby 1100_imp - 06-02-2014
http://shop.sw-motech.com/cgi-bin/cosmoshop/lshop.cgi?action=showdetail&wkid=140172237819140&ls=en&nc=1401722709-25582&rubnum=products.ergonomie.fussrasten&artnum=FRS.01.011.10400/S&id=48&gesamt_zeilen=Tshowrub--products.ergonomie.fussrasten&typid=143569418
I like the looks and potential comfort of the pegs shown in the above link. Does anyone know if pegs for a CB1300 would fit our CB1100?
RE: Lowering footpegs and bars pics - bustin dailey_imp - 06-02-2014
I ordered those same pegs (knight design) after seeing your post. I am 6'4 so I also ordered the TIROS K style seat, since my butt falls asleep after 30 minutes on the stock seat.
I'm really considering the bars... I'd like to see some close-up installed pics of your bars. Although the video was good, I just want to see how they look mounted on our bikes.
RE: Lowering footpegs and bars pics - Houtman_imp - 06-02-2014
(06-02-2014, 01:46 AM)Gumby 1100_imp Wrote: http://shop.sw-motech.com/cgi-bin/cosmoshop/lshop.cgi?action=showdetail&wkid=140172237819140&ls=en&nc=1401722709-25582&rubnum=products.ergonomie.fussrasten&artnum=FRS.01.011.10400/S&id=48&gesamt_zeilen=Tshowrub--products.ergonomie.fussrasten&typid=143569418I have the Vario adjustable foot pegs on both of my CB1000 and my CB1100 , Honda use very much the same swivel part on their road bikes.
I like the looks and potential comfort of the pegs shown in the above link. Does anyone know if pegs for a CB1300 would fit our CB1100?
Just check the Honda models on the Twisted Trottle web site.
RE: evryone loves pics - rob_imp - 06-02-2014
(05-31-2014, 12:18 AM)cosmos_imp Wrote: I have the Arrow slip on exhaust. It comes with a removable baffle, which I removed, and I think it's the 2nd best sounding exhaust right behind pipemasters 4 into 4. That whole money thing again. This thread convinced me, and I think it sounds even better in person
http://cb1100forum.com/forum/showthread.php?tid=1879
I know about the foot dragging, I have size 16 feet! The only time I drag is when shifting and turning left, when just pulling away from a stop, so I just have to keep that in mind. If I'm not shifting or braking I have the balls of my feet on the pegs so no problems.
The pegs are knight design
http://www.knightdesignllc.com/Products/Motorcycle/Honda/CB/Honda_CB1100_Foot_Pegs.html
and a pic of left side
[/img]
Were they a straight bolt on?
RE: Lowering footpegs and bars pics - hondahoarder_imp - 06-03-2014
Thanks for the info and sharing