+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: ECU flash (/showthread.php?tid=10104)
RE: ECU flash - NHCB_imp - 08-27-2014
He told me he would like to try as many different things as he could, so I bet he would like both pipes. Also just for your piece of mind Hiker, he said the actual run time on the bike would be minimal. Most of the time would be on the computer.
RE: ECU flash - CIP57_imp - 08-27-2014
Put the stock exhaust on or bring it with you. Don is looking to Dyno a stock bike in turn he will not charge you for the Dyno time, then do a few pulls with the other can and see if there is any difference. The flash file is already done, he may even give you a discount on that.
ECU flash - Elipten_imp - 08-27-2014
Bring stock can to him and I'll chip in also.
Sent from my iPad using Tapatalk
RE: ECU flash - HikerToo_imp - 08-29-2014
OK, stopped by Guhl's today to setup my time and talk to Don.
I'll drop it off to him this Tuesday the 2nd, although he is busy and may have it until the following week.
He did walk out to look at my CB since he has not seen one in person.
I plan to bring the stock muffler too.
I'm sure the idea is for him to build a more accurate and finely tuned flash file based on results with the Dyno, not use the one he already did for a couple of our guys already.
Because the timing is going to be altered, there is a chance I may need to run Premium gas after this work....we'll see.
I'll keep everyone updated
RE: ECU flash - DAC - 08-29-2014
Premium gas with a 9.5/1 compression ratio? Really?
Re: RE: ECU flash - kDiqq_imp - 08-29-2014
(08-29-2014, 04:42 AM)DAC_imp Wrote: Premium gas with a 9.5/1 compression ratio? Really?
With timing advanced, oh yeah. I've had motors as low as 9.1:1 knock with more timing and low octane fuel. But on a stock tune, yeah use regular
Sent from my Z30 using Tapatalk
RE: ECU flash - CIP57_imp - 08-29-2014
(08-29-2014, 04:25 AM)HikerToo_imp Wrote: OK, stopped by Guhl's today to setup my time and talk to Don.
I'll drop it off to him this Tuesday the 2nd, although he is busy and may have it until the following week.
He did walk out to look at my CB since he has not seen one in person.
I plan to bring the stock muffler too.
I'm sure the idea is for him to build a more accurate and finely tuned flash file based on results with the Dyno, not use the one he already did for a couple of our guys already.
Because the timing is going to be altered, there is a chance I may need to run Premium gas after this work....we'll see.
I'll keep everyone updated
Good for you Hiker, never met Don but per our conversations he's a real nice guy.
RE: ECU flash - Lama glama_imp - 08-29-2014
Please keep us updated.
RE: ECU flash - Randy B - 08-29-2014
Anxiously waiting.
ECU flash - Cormanus - 08-29-2014
Feeling cheated.
