The CB1100 Community Forum
Fabbing an adaptor to move signals back. May duplicate for y'all - Printable Version

+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Accessories/Modifications (https://cb1100forum.net/forum/forumdisplay.php?fid=8)
+--- Thread: Fabbing an adaptor to move signals back. May duplicate for y'all (/showthread.php?tid=10102)

Pages: 1 2 3 4 5 6

RE: Fabbing an adaptor to move signals back. May duplicate for y'all - CB4ME_imp - 04-04-2014

Now if someone would come up with a short plug and play Male - Female cable extender you wouldn't have to mess with the wiring.

Fabbing an adaptor to move signals back. May duplicate for y'all - Romo1969_imp - 04-05-2014

Crank idea has merit[Image: b861f5bc956a354e95a74aa596b335a3.jpg][Image: 3017763cef1a1bf1545207e433f424ac.jpg][Image: fe0de3aa450ee24a044c2a9949fad070.jpg]


Sent from my iPad using Tapatalk

RE: Fabbing an adaptor to move signals back. May duplicate for y'all - vfrpaul98_imp - 04-05-2014

(04-04-2014, 09:15 PM)CB4ME_imp Wrote: Now if someone would come up with a short plug and play Male - Female cable extender you wouldn't have to mess with the wiring.
http://www.cycleterminal.com/050-connectors.html

2 pin HC .050 Turn Signal Connector
needed for rear signals only on 2013 cb1100
order 2 male and 2 female connectors and you can make your own extension length.no minimum order.
just a thought.
Paul.

Fabbing an adaptor to move signals back. May duplicate for y'all - Romo1969_imp - 04-05-2014

(04-05-2014, 09:06 AM)vfrpaul98_imp Wrote:
(04-04-2014, 09:15 PM)CB4ME_imp Wrote: Now if someone would come up with a short plug and play Male - Female cable extender you wouldn't have to mess with the wiring.
http://www.cycleterminal.com/050-connectors.html

2 pin HC .050 Turn Signal Connector
needed for rear signals only on 2013 cb1100
order 2 male and 2 female connectors and you can make your own extension length.no minimum order.
just a thought.
Paul.
http://www.cycleterminal.com/050-connectors.html

2 pin HC .050 Turn Signal Connector
needed for rear signals only on 2013 cb1100
order 2 male and 2 female connectors and you can make your own extension length.no minimum order.
just a thought.
Paul.
[Image: 0732eab45877f2b32b44b6347b564e0c.jpg]


Sent from my iPad using Tapatalk

RE: Fabbing an adaptor to move signals back. May duplicate for y'all - VTR1000F_imp - 04-07-2014

Make a reasonably priced kit and I´m in for a set.

Fabbing an adaptor to move signals back. May duplicate for y'all - Romo1969_imp - 04-09-2014

[Image: 1428b1a05ce45530d8fefca799794b9b.jpg][Image: 6baf4e6f68c31a61d660f0845bd8734b.jpg]


Sent from my iPad using Tapatalk

RE: Fabbing an adaptor to move signals back. May duplicate for y'all - rboe - 04-09-2014

Call me old fashion, I prefer the sketch on the napkin...... Angel

Re: RE: Fabbing an adaptor to move signals back. May duplicate for y'all - dBuster_imp - 04-10-2014

(04-09-2014, 11:59 PM)Rboe_imp Wrote: Call me old fashion, I prefer the sketch on the napkin...... Angel

There was a sketch on a napkin? Where let me see it! Those are the start of great ideas on napkins!

Sent from my XT1055 using Tapatalk

RE: Fabbing an adaptor to move signals back. May duplicate for y'all - rboe - 04-10-2014

I believe it was in the other thread.

Fabbing an adaptor to move signals back. May duplicate for y'all - Romo1969_imp - 04-10-2014

(04-10-2014, 06:18 AM)dBuster_imp Wrote:
(04-09-2014, 11:59 PM)Rboe_imp Wrote: Call me old fashion, I prefer the sketch on the napkin...... Angel

There was a sketch on a napkin? Where let me see it! Those are the start of great ideas on napkins!

Sent from my XT1055 using Tapatalk

There was a sketch on a napkin? Where let me see it! Those are the start of great ideas on napkins!

Sent from my XT1055 using Tapatalk
[Image: 723d205035bb3bd7a50429e9a4ad7a71.jpg]

Actually back of a check stub. But 6 of one. Lol


Sent from my iPad using Tapatalk