![]() |
|
CB1100 Idle speed instability problem - Printable Version +- The CB1100 Community Forum (https://cb1100forum.net/forum) +-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5) +--- Forum: Mechanical & Technical (https://cb1100forum.net/forum/forumdisplay.php?fid=7) +--- Thread: CB1100 Idle speed instability problem (/showthread.php?tid=4140) Pages:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
|
RE: CB1100 Idle speed instability problem - Enzofour_imp - 07-20-2023 For all the work I went through to replace the IACV (I followed the Honda service manual and removed the entire rear fender to allow clearance to remove the airbox) I would have prefered to replace, or reprogram the ECM, but the reprogram option wasn't available five years ago, and I had no information available then that replacing the ECM would work. My bike was examined by an authorized Honda dealer at that time, under warranty, and they performed a computer diagnosis that didn't find any errors. As luck would have it, the problem was not present when I delivered the bike to the shop. [/quote] you did this? ![]() ![]() I disassembled less ![]()
RE: CB1100 Idle speed instability problem - peterbaron - 07-20-2023 (07-20-2023, 03:01 PM)max_imp Wrote: Just posting some images for Peter here, just ignore for now please; Ok moderators, I am done with this diagram and it can be deleted to comply with the regulations. Thanks
RE: CB1100 Idle speed instability problem - dave - 07-21-2023 How much forcing and bending to the air box did you have to do to get it to squeeze out? I was afraid I would break the air box if I tried to force it out. It continues to amaze me that so many people in so many parts of the WORLD with so many different model and years of this model of Honda motorcycle have had this similar problem and Honda has completely ignored it. [/quote] Does anyone know if Honda "secretly" released a service bulletin to its dealers with instructions for repairing the idle issue? I don't know what the name for it is, but basically the manufacturer keeps all information about the problem quiet, and never releases any information to any of the unsuspecting customers. In this case it looks like the secrete service bulletin would be a replacement of the ECM with the new (updated) part number. RE: CB1100 Idle speed instability problem - the Ferret - 07-21-2023 I know there was never said anything to US dealers. My tech would have told me. RE: CB1100 Idle speed instability problem - peterbaron - 07-27-2023 (07-20-2023, 03:01 PM)max_imp Wrote: Just posting some images for Peter here, just ignore for now please; Max , sorry for late response, here are the results: Conditions: 2014 CB1100 Std, fully charged battery at 12.5V, red killer switch in "kill" position black-10 pin connector/double row of 5 pins wires: white to red-white ![]() * ignition OFF = NO voltage ![]() * ignition ON = 9.8V * engine running = 12.5V Cheers RE: CB1100 Idle speed instability problem - Lord Popgun - 07-27-2023 PB, No Flukes in Canada?
RE: CB1100 Idle speed instability problem - peterbaron - 07-27-2023 (07-27-2023, 12:58 AM)Lord Popgun_imp Wrote: PB, The last one was shipped to Virginia, Norfolk area
RE: CB1100 Idle speed instability problem - max - 07-28-2023 Peter thanks very much for measuring this very precisely and well documented, This is likely the " keep alive " supply that supplies voltage to the ecu's memory when the ignition is switched off. It could be used to simulate a " battery reset " every time the bike is switched off for some time and maybe aid in solving the ii issue. It would require a small relay in line with this wire which is energized when the ignition is switched on and de-energized ( off ) when the ignition is switched off. All the wiring is accessible inside the headlamp bucket to do this modification if someone would try this out in favour of replacing the ecu. Any thoughts on this procedure? RE: CB1100 Idle speed instability problem - peterbaron - 07-28-2023 NP. ... when you asked me to do that test, I already new what your plan was.., very smart
RE: CB1100 Idle speed instability problem - max - 07-28-2023 (07-28-2023, 08:13 AM)peterbaron_imp Wrote: NP. ... when you asked me to do that test, I already new what your plan was.., very smart Yeah so please ignore the pm reply, i read the result wrong the first time ![]() Boy that was quick!! |