+- The CB1100 Community Forum (https://cb1100forum.net/forum)
+-- Forum: Honda CB1100 Discussions (https://cb1100forum.net/forum/forumdisplay.php?fid=5)
+--- Forum: Mechanical & Technical (https://cb1100forum.net/forum/forumdisplay.php?fid=7)
+--- Thread: CB1100 Idle speed instability problem (/showthread.php?tid=4140)
Pages:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
RE: CB1100 Idle speed instability problem - peterbaron - 03-18-2021
Just don't know why Honda used this prehistoric stepper motor solution....when there is much modern, flawlessly working air idle control valve design...perhaps cost or historic stock pile forced them to use it
RE: CB1100 Idle speed instability problem - GoldOxide_imp - 03-18-2021
It could be as simple as they understand their implementation and its range of ability that is "good enough" to meet product requirements. This practice is very common among industrial product companies.
If it failed to meet their product requirements, they would seek out an alternative, and possibly more modern or simpler approach.
And yes, maybe Honda has a huge inventory of these parts. That also plays into decision making for sure [url=http://cb1100forum.com/forum/member.php?action=profile&uid=3454]PB.
RE: CB1100 Idle speed instability problem - dave - 03-18-2021
That's incredible what you did. I don't know how you were able to remove some of the screws holding the airbox sections together.
RE: CB1100 Idle speed instability problem - Enzofour_imp - 03-18-2021
(03-18-2021, 01:57 PM)Dave_imp Wrote: That's incredible what you did. I don't know how you were able to remove some of the screws holding the airbox sections together.
with a lot of patience and a pinch of cunning.
Seriously, the biggest challenge was getting the airbox off the frame.
Your always ok with the new IACV?
How many km have you traveled since the replacement?
RE: CB1100 Idle speed instability problem - PowerDubs_imp - 03-20-2021
(03-18-2021, 01:57 PM)Dave_imp Wrote: That's incredible what you did. I don't know how you were able to remove some of the screws holding the airbox sections together.
Same way we all swap the velocity stacks? Not difficult...
RE: CB1100 Idle speed instability problem - dave - 03-22-2021
Your always ok with the new IACV?
How many km have you traveled since the replacement?
[/quote]
I have logged almost 10,000 miles since replacing the IACV. Bike continues to run perfectly.
RE: CB1100 Idle speed instability problem - Enzofour_imp - 03-22-2021
(03-22-2021, 03:10 AM)Dave_imp Wrote: Your always ok with the new IACV?
How many km have you traveled since the replacement?
I have logged almost 10,000 miles since replacing the IACV. Bike continues to run perfectly.
[/quote]
I have logged almost 10,000 miles since replacing the IACV. Bike continues to run perfectly.
[/quote]
wonderful news
RE: CB1100 Idle speed instability problem - max - 03-22-2021
Enzo since you have a bad iacv can you think of a reason that made it fail slowly?
And which screw was the most difficult to remove in the airbox?
RE: CB1100 Idle speed instability problem - Enzofour_imp - 03-22-2021
(03-22-2021, 03:25 AM)max_imp Wrote: Enzo since you have a bad iacv can you think of a reason that made it fail slowly?
And which screw was the most difficult to remove in the airbox?
As I wrote in another post, I bought the bike used in November 2020.
Due to lockdown covid I did very few 400 km approx. Twice it turned off due to a too low minimum, the last vote was turned off by the Honda dealer who found the problem, in fact the new IACV valve is given to me under warranty.
No screws were particularly difficult, the difficulty was getting the filter box out of the frame, due to the very little space.
RE: CB1100 Idle speed instability problem - Enzofour_imp - 04-01-2021
Today the Honda dealer informed me that in 2016 Honda sent dealers an ECU update.
This update was not an official reminder, but a tip to use on 2014/2015 models with low idle and shutdown issues.
On 14/04/2021 they will install this update for me, we will see the effects.
I will try to get the name / code of the firmware for this update.
Meanwhile, with the replacement of the IACV the bike didn't give me any more problems.