07-17-2015, 08:04 PM
07-19-2015, 09:58 AM
G'day Henrik. As of today I have only put 9.6kms on them, so too early to report. I have just had a two week holiday in Thailand and on returning to Australia we went to Canberra to visit friends. So no chance to ride any distance. Before riding again I am going to service the brake system. I did notice that when I replaced the front wheel after the tyre change that the front pads were approaching the wear limit. Also the lever feels a little soft despite a thorough brake bleed. I suspect that maybe one of the caliper piston seals may have been contaminated so I will pull the front calipers apart, inspect and then replace the seals and pads.
Cheers.
Cheers.
07-19-2015, 04:34 PM
Thanks for the update!
I hope Thailand was good, and that you can now get back to the important work of getting your bike take care off!!
Cheers,
Henrik
I hope Thailand was good, and that you can now get back to the important work of getting your bike take care off!!
Cheers,
Henrik
08-09-2015, 08:30 AM
(07-19-2015, 09:58 AM)Pterodactyl_imp Wrote: [ -> ]G'day Henrik. As of today I have only put 9.6kms on them, so too early to report. I have just had a two week holiday in Thailand and on returning to Australia we went to Canberra to visit friends. So no chance to ride any distance. Before riding again I am going to service the brake system. I did notice that when I replaced the front wheel after the tyre change that the front pads were approaching the wear limit. Also the lever feels a little soft despite a thorough brake bleed. I suspect that maybe one of the caliper piston seals may have been contaminated so I will pull the front calipers apart, inspect and then replace the seals and pads.
Cheers.
Any update on how you like these? I am considering a pair.
08-09-2015, 08:42 AM
^^^^^. I am taking them for a long ride today so will post this evening.
Cheers
Cheers
08-09-2015, 10:04 AM
You will like them. I got these fitted on my CB about 3k ago. They are like riding on velcro compared to the stock Bridgestones (which were pretty good in their own right).
08-09-2015, 01:06 PM
Ptero, did you measure the depth of the tread front and rear?
08-09-2015, 06:39 PM
(08-09-2015, 01:06 PM)The ferret_imp Wrote: [ -> ]Ptero, did you measure the depth of the tread front and rear?
Front:
4.3mm
![[Image: 25f96fc3734f069c4acfa366bdf9ecd5.jpg]](https://cb1100forum.net/forum/uploads/imp/201508/25f96fc3734f069c4acfa366bdf9ecd5.jpg)
2.8mm
![[Image: e956fd50766ddf691bce70a1968c38f1.jpg]](https://cb1100forum.net/forum/uploads/imp/201508/e956fd50766ddf691bce70a1968c38f1.jpg)
Rear:
6mm
![[Image: de2f79bfbf4883f371cec77de83b1a8e.jpg]](https://cb1100forum.net/forum/uploads/imp/201508/de2f79bfbf4883f371cec77de83b1a8e.jpg)
4mm
![[Image: e8d4e15a24fca330e0a29c0c7dff2a2a.jpg]](https://cb1100forum.net/forum/uploads/imp/201508/e8d4e15a24fca330e0a29c0c7dff2a2a.jpg)
Cheers
08-09-2015, 07:11 PM
A man with a Vernier now that brings a smile to my face, all the best with your new shoes.
Regards
Regards
08-09-2015, 09:18 PM
Thanks mate.