05-15-2016, 08:04 AM
Came upon these hardbags my dad had in his garage over the weekend. I can't get a name on the manufacturer that makes them other than the built in turn signals which are Grote. I've included some pictures to show the mounting points.
I'm opening this thread to ask for some suggestions as to what to do to get the right mounting hardware. I have the stock exhaust on my '13 STD so I know that creates some issues with not getting too close to exhaust. The hardbag is 13" at it's tallest and 22" long, and about 9" wide. I'd have to get rid of my turn signals to mount, but they come with built in signals on the bottom back that would hopefully work. Not looking to do serious mods on these bags if that's what's needed, but if there's some quick fix to get these going aside from the imminent electricals I'd like to hear some opinions.
Me holding the bag in place for reference. Too close to exhaust, but I think they could be mounted higher despite this pic:
[url=http://s903.photobucket.com/user/specialist87/media/IMG_1053.jpg.html]![[Image: 5edc4ca21a733cd5b554c13b50eeb72b.jpg]](https://cb1100forum.net/forum/uploads/imp/201605/5edc4ca21a733cd5b554c13b50eeb72b.jpg)
Right hardbag:
[url=http://s903.photobucket.com/user/specialist87/media/IMG_1054.jpg.html]![[Image: 73575426e6ccaded951f1d8e7f37a6cf.jpg]](https://cb1100forum.net/forum/uploads/imp/201605/73575426e6ccaded951f1d8e7f37a6cf.jpg)
Left hardbag:
[url=http://s903.photobucket.com/user/specialist87/media/IMG_1052.jpg.html]![[Image: 7d025d958c871b155cf2de7df603201c.jpg]](https://cb1100forum.net/forum/uploads/imp/201605/7d025d958c871b155cf2de7df603201c.jpg)
Inside of right bag showing the mounting points:
[url=http://s903.photobucket.com/user/specialist87/media/IMG_1055.jpg.html]![[Image: a38ac7d85a22ce6e92a9908c7f288faa.jpg]](https://cb1100forum.net/forum/uploads/imp/201605/a38ac7d85a22ce6e92a9908c7f288faa.jpg)
Rear inside of right saddlebag showing the electricals for built-in turn signal:
[url=http://s903.photobucket.com/user/specialist87/media/IMG_1056.jpg.html]![[Image: 35a420ae38c3e1ef79ebb888061cb1df.jpg]](https://cb1100forum.net/forum/uploads/imp/201605/35a420ae38c3e1ef79ebb888061cb1df.jpg)
I'm opening this thread to ask for some suggestions as to what to do to get the right mounting hardware. I have the stock exhaust on my '13 STD so I know that creates some issues with not getting too close to exhaust. The hardbag is 13" at it's tallest and 22" long, and about 9" wide. I'd have to get rid of my turn signals to mount, but they come with built in signals on the bottom back that would hopefully work. Not looking to do serious mods on these bags if that's what's needed, but if there's some quick fix to get these going aside from the imminent electricals I'd like to hear some opinions.
Me holding the bag in place for reference. Too close to exhaust, but I think they could be mounted higher despite this pic:
[url=http://s903.photobucket.com/user/specialist87/media/IMG_1053.jpg.html]
![[Image: 5edc4ca21a733cd5b554c13b50eeb72b.jpg]](https://cb1100forum.net/forum/uploads/imp/201605/5edc4ca21a733cd5b554c13b50eeb72b.jpg)
Right hardbag:
[url=http://s903.photobucket.com/user/specialist87/media/IMG_1054.jpg.html]
![[Image: 73575426e6ccaded951f1d8e7f37a6cf.jpg]](https://cb1100forum.net/forum/uploads/imp/201605/73575426e6ccaded951f1d8e7f37a6cf.jpg)
Left hardbag:
[url=http://s903.photobucket.com/user/specialist87/media/IMG_1052.jpg.html]
![[Image: 7d025d958c871b155cf2de7df603201c.jpg]](https://cb1100forum.net/forum/uploads/imp/201605/7d025d958c871b155cf2de7df603201c.jpg)
Inside of right bag showing the mounting points:
[url=http://s903.photobucket.com/user/specialist87/media/IMG_1055.jpg.html]
![[Image: a38ac7d85a22ce6e92a9908c7f288faa.jpg]](https://cb1100forum.net/forum/uploads/imp/201605/a38ac7d85a22ce6e92a9908c7f288faa.jpg)
Rear inside of right saddlebag showing the electricals for built-in turn signal:
[url=http://s903.photobucket.com/user/specialist87/media/IMG_1056.jpg.html]
![[Image: 35a420ae38c3e1ef79ebb888061cb1df.jpg]](https://cb1100forum.net/forum/uploads/imp/201605/35a420ae38c3e1ef79ebb888061cb1df.jpg)
