The CB1100 Community Forum

I have this one:

https://www.samurider.com/?p=13212/#itemImage

But there are some other cheaper options on that site as well.

(05-14-2017, 11:28 AM)chync_imp Wrote: [ -> ]I have this one:

https://www.samurider.com/?p=13212/#itemImage

But there are some other cheaper options on that site as well.

Thanks chync, it looks great! I will take a look on all options there but I am looking for a windscreen priced below $200.

I just put this 12 inch Puig on my 2014 today. https://www.revzilla.com/motorcycle/puig...-2013-2014

$126 at Revzilla, very easy install, free shipping. I haven't tried it, yet, so don't know how it will perform. I'm used to a giant, billboard-sized screen on the Victory I last rode for 16 years, so it will be different.

I have a 2014 dlx. In the fall and when on a trip, I use a cut down NC Street Shield EX. It bolts to the handlebars and upper fork legs. I have it so the top of the shield is approx 10" over the ign switch. There is approx 3/4" clearance above the headlight bucket. And maybe 1/2" clearance from the instruments, but all the clearances are adjustable. Anything over 10" and below 22" seems to create turbulence noise and head bobbling.

My head and neck are in clean air, the shield keeps the wind pressure off my chest ( and tank bag) which is really all I require. It is off right now for local riding in these temps, but will go on next week for my trip to Ark.

(05-14-2017, 11:42 AM)JEB_imp Wrote: [ -> ]I just put this 12 inch Puig on my 2014 today. https://www.revzilla.com/motorcycle/puig...-2013-2014

$126 at Revzilla, very easy install, free shipping. I haven't tried it, yet, so don't know how it will perform. I'm used to a giant, billboard-sized screen on the Victory I last rode for 16 years, so it will be different.

Hi JEB,
That is the one that I just tried on mine. The side screws touch the instruments, no clearance at all. I believe if you keep it installed permanently it shouldn't matter but I plan to remove it if not riding all day.

(05-14-2017, 12:04 PM)The ferret_imp Wrote: [ -> ]I have a 2014 dlx. In the fall and when on a trip, I use a cut down NC Street Shield EX. It bolts to the handlebars and upper fork legs. I have it so the top of the shield is approx 10" over the ign switch. There is approx 3/4" clearance above the headlight bucket. And maybe 1/2" clearance from the instruments, but all the clearances are adjustable. Anything over 10" and below 22" seems to create turbulence noise and head bobbling.

My head and neck are in clean air, the shield keeps the wind pressure off my chest ( and tank bag) which is really all I require. It is off right now for local riding in these temps, but will go on next week for my trip to Ark.

Do you have a side view of it?
I am thinking about this one from Samurider but it has 3 options for size:
https://www.samurider.com/?p=24784
Small


Medium


Large

http://cb1100forum.com/forum/showthread....+shield+ex

[url=http://smg.photobucket.com/user/theferret111/media/016_zpsuozo0dbg.jpg.html]


[url=http://smg.photobucket.com/user/theferret111/media/Jan%201%202017%20003_zpsnysatuvk.jpg.html]

(05-14-2017, 12:45 PM)The ferret_imp Wrote: [ -> ]http://cb1100forum.com/forum/showthread....+shield+ex

[url=http://smg.photobucket.com/user/theferret111/media/016_zpsuozo0dbg.jpg.html]


[url=http://smg.photobucket.com/user/theferret111/media/Jan%201%202017%20003_zpsnysatuvk.jpg.html]

Thanks! By comparing the pictures side by side, it's either small or medium.
I sent a message to fishmitch since he mentioned purchasing this windscreen back in 2013.
But I am not sure Mr. T can ship it and have it delivered before the end of May.

I'm sure my big ugly screen would fit a 2014. The small Emgo screen might fit with a little careful trimming.

It doesnt come from Samurider it comes from Natl Cycle or one of it's distrubtors in the US. Probably get one in 2 days.

Nice thing is 5 mins on, 5 mins off, if you are taking your time.

I just requested a quote to Mr. T and asked about estimated delivery date.

I also requested a quote on a Road Comet 1 (although I am not planning to spend that much money on a windscreen), like this one:

(05-14-2017, 01:12 PM)The ferret_imp Wrote: [ -> ]It doesnt come from Samurider it comes from Natl Cycle or one of it's distrubtors in the US. Probably get one in 2 days.

Nice thing is 5 mins on, 5 mins off, if you are taking your time.

Sorry, I was referring to the Chic Design Guyra model.
I wanted to see your windscreen to compare the height with the Guyra size options.

(05-14-2017, 01:07 PM)kennyw_imp Wrote: [ -> ]I'm sure my big ugly screen would fit a 2014. The small Emgo screen might fit with a little careful trimming.

Thanks kennyw, but I want to keep the CB as close to stock look as possible.

(05-14-2017, 01:12 PM)The ferret_imp Wrote: [ -> ]It doesnt come from Samurider it comes from Natl Cycle or one of it's distrubtors in the US. Probably get one in 2 days.

Nice thing is 5 mins on, 5 mins off, if you are taking your time.

You had to cut yours to get the best wind protection without buffeting, right?