(04-07-2018, 12:45 AM)misterprofessionality_imp Wrote: [ -> ] (04-07-2018, 12:34 AM)Blockhead_imp Wrote: [ -> ] (04-07-2018, 12:00 AM)The ferret_imp Wrote: [ -> ]Good gaiters like the Triumph or Kawasaki units will set you back $100. The others are not worth putting on your bike and will split/rip in 6 months. Not kidding.
You might contact Frank at Greatdaytoride.com about altering your seat. He's good, he's quick and he's inexpensive.
http://cb1100forum.com/forum/showthread....ht=Gaiters
Don’t be shy ferret, tell him about your ‘how to’ thread on gaiter installation...‘twas a masterpiece. 
what the heck....you have to remove things to put those on? you're talking to a guy who takes his bike to the shop for oil changes. no way in blazes am i removing things like wheels and brakes. it's guaranteed to malfunction when i put it back together. nuh uh. not this guy. fork gaiters are out.
what the heck....you have to remove things to put those on? you're talking to a guy who takes his bike to the shop for oil changes. no way in blazes am i removing things like wheels and brakes.
I've never understood that. lefty loosy, righty tighty... fixing things is easy.
Of course- I also don't understand moderators editing someone else's post of he** to fit their own moral standing. I find that insulting, condescending, and frankly ignorant. Might as well be a flat earther...
Sorry that offends you Dubs, I'm just following instructions from the administrator.
(04-07-2018, 03:00 AM)pdedse_imp Wrote: [ -> ] (04-06-2018, 06:09 AM)EmptySea_imp Wrote: [ -> ]1,000,000 years from know, an archeologist is going to dig up a small piece of aluminum with a rubber ball on one end and wonder what the heck it is. They ain't coming off.
And she will exclaim, "huh!, I wonder what purpose this Rubber Thing on the End of the Lever had? From then on, the great RTEL debate will begin...were RTELs used to grip better?, were RTELs used to protect something?, why did a few previously discovered levers have no RTEL? Never will they realize how close they were to the true acronym.
Some rookie archeologist will be scoffed at when she suggests that maybe they were for show only.
Prevents unwanted...
Oh. Wait. Y'all are talking about something else. Never mind.
(04-07-2018, 03:00 AM)pdedse_imp Wrote: [ -> ] (04-06-2018, 06:09 AM)EmptySea_imp Wrote: [ -> ]1,000,000 years from know, an archeologist is going to dig up a small piece of aluminum with a rubber ball on one end and wonder what the heck it is. They ain't coming off.
And she will exclaim, "huh!, I wonder what purpose this Rubber Thing on the End of the Lever had? From then on, the great RTEL debate will begin...were RTELs used to grip better?, were RTELs used to protect something?, why did a few previously discovered levers have no RTEL? Never will they realize how close they were to the true acronym.
Some rookie archeologist will be scoffed at when she suggests that maybe they were for show only.
And she will exclaim, "huh!, I wonder what purpose this Rubber Thing on the End of the Lever had? From then on, the great RTEL debate will begin...were RTELs used to grip better?, were RTELs used to protect something?, why did a few previously discovered levers have no RTEL? Never will they realize how close they were to the true acronym.
Some rookie archeologist will be scoffed at when she suggests that maybe they were for show only.
Brilliant pdedse!
(04-07-2018, 02:32 AM)Lord Popgun_imp Wrote: [ -> ]You can buy split gaiters that kind of snap together and are held by tie wraps. Don’t know how good they are.
I think those were the ones i was looking at that were only like 15 bucks. it's probably the reason i was surprised to read the actual process for installing real gaiters. according to previous posts, they might be cuss.
but hear me out...if you put on crappy gaiters that cost 15 bucks, and they break down in 6 months, you can buy more and put them on again. in fact, you can do that a grand total of 6 times before you run up to the price of "good" gaiters. then you have to ask yourself, how long do "good" gaiters last? maybe the answer for somebody who's bad at mechanics like me is to just buy the crappy ones.
(04-07-2018, 02:54 AM)Nemo_imp Wrote: [ -> ] (04-07-2018, 12:45 AM)misterprofessionality_imp Wrote: [ -> ] (04-07-2018, 12:34 AM)Blockhead_imp Wrote: [ -> ] (04-07-2018, 12:00 AM)The ferret_imp Wrote: [ -> ]Good gaiters like the Triumph or Kawasaki units will set you back $100. The others are not worth putting on your bike and will split/rip in 6 months. Not kidding.
You might contact Frank at Greatdaytoride.com about altering your seat. He's good, he's quick and he's inexpensive.
http://cb1100forum.com/forum/showthread....ht=Gaiters
Don’t be shy ferret, tell him about your ‘how to’ thread on gaiter installation...‘twas a masterpiece.
what the heck....you have to remove things to put those on? you're talking to a guy who takes his bike to the shop for oil changes. no way in blazes am i removing things like wheels and brakes. it's guaranteed to malfunction when i put it back together. nuh uh. not this guy. fork gaiters are out.
1. Buy Kawi gaters
2. Attend the rally in Berea and bring the gaters
3. We can install them for you an afternoon after riding, between beer and cigars
4. You’re welcome
Thank you! remind me to look up where Berea is, and calculate whether or not the trip would cost the same as having my local mechanic do it
(04-07-2018, 04:17 AM)PowerDubs_imp Wrote: [ -> ] (04-07-2018, 12:45 AM)misterprofessionality_imp Wrote: [ -> ] (04-07-2018, 12:34 AM)Blockhead_imp Wrote: [ -> ] (04-07-2018, 12:00 AM)The ferret_imp Wrote: [ -> ]Good gaiters like the Triumph or Kawasaki units will set you back $100. The others are not worth putting on your bike and will split/rip in 6 months. Not kidding.
You might contact Frank at Greatdaytoride.com about altering your seat. He's good, he's quick and he's inexpensive.
http://cb1100forum.com/forum/showthread....ht=Gaiters
Don’t be shy ferret, tell him about your ‘how to’ thread on gaiter installation...‘twas a masterpiece.
what the heck....you have to remove things to put those on? you're talking to a guy who takes his bike to the shop for oil changes. no way in blazes am i removing things like wheels and brakes. it's guaranteed to malfunction when i put it back together. nuh uh. not this guy. fork gaiters are out.
what the heck....you have to remove things to put those on? you're talking to a guy who takes his bike to the shop for oil changes. no way in blazes am i removing things like wheels and brakes.
I've never understood that. lefty loosy, righty tighty... fixing things is easy.
Of course- I also don't understand moderators editing someone else's post of he** to fit their own moral standing. I find that insulting, condescending, and frankly ignorant. Might as well be a flat earther...
it's just risk management. i'm happy to screw around with things that i don't rely on. I rely on my bike. forget wrecking and getting hurt. if something goes wrong with my bike because i'm a moron and didn't take it to a mechanic because i wanted to screw around with it myself, then i lose my one and only way to get to work every day. I can't risk that. there's too much riding on my steady income, and i can't just take days off because "hurr durr my bike doesn't run today because i tried to work on something i can't even begin to fully understand."
If i had a spare bike to work on, sure, i'd try to learn, but this machine is too important. i can't take risks like that.
I second the SW Motech engine guards. They are well made, fit right, and are powder coated. I personally dont consider them a dress up, as they will not only protect expensive engine parts in a lay down, but also will take some of the bikes weight off of you if you are unlucky enough to be under the bike when it goes down. Here is a thread I did on best use of mounting bolts, and correct mounting bolt torque values.
http://cb1100forum.com/forum/showthread....#pid179410
Well if it requires a torque wrench, i'm already disqualified :-p
Hi guys...I tried the split gaiters. I challenge anyone to prove that they can actually successfully install them! I ordered the correct size from Revzilla then spent several hours over two different days trying to get the seams to pop together, and they would not. Turned out to be a good thing, as seeing them in person they were much too bulky in profile, not enough pleats, and were going to look very cheap and low class even if I had been able to get them to work. Sent them back, ordered the Kawasaki ones for 4x the price...but they're worth every penny. Even including the wheel and fork removal/reinstall it took far less time than I spent wrestling with those ridiculous, ugly split gaiters -- they simply have no place on a classy bike like the CB1100.
One man's story, your mileage may vary : )
-Karl
KVDV would you kindly provide a link to the kawasaki gaiters you bought? i'm going to have some put on when i take my bike in for it's next set of tires. figure it won't cost me anything if the wheels are already off the bike.
