I swapped my exhaust for a Nojima megaphone and lost my center stand stop. Do you know if there is an aftermarket accessory to create a new stop?
Looking forward to your recommendations.
I used a metal hose clamp on the muffler. I aligned the screw head of the clamp to a position that allowed it to act as the stop.
Sent from my iPhone using Tapatalk
Hey, Nemo, when it's all done, how about a picture or two, please?
Crisis averted. The new exhaust (Nojima Megaphone) doesn't have the "ledge" where the center stand stops when tucked in, therefore, the center stand was going all the way up and resting on my chain.
I removed the rubber pad that made contact with the ledge and in the hole it left installed a 5" carriage bolt, one not to secure it and another to jam the first. Covered the bolt with heat shrink, and Loc-Tited a threaded rubber bushing on the tip of the bolt.
Now the bike has a new look and sound.
There's a flaw to my "under the mango tree" engineering but I hope it will withstand it.
Peace!
Razor,
I would buy one of those whenever you have it ready.
We'll catch up next year. Have fun!
Sorry my friend. Only made one and didn’t jot down the measurements
