(03-24-2019, 04:08 PM)Dubai1100_imp Wrote: [ -> ] (03-24-2019, 08:32 AM)Cormanus_imp Wrote: [ -> ]Ah! This might turn out to be the first 2017 CB1100 Standard model reported outside Japan. It has the traditional shaped tank and twin exhausts. In the absence f being able to find one on a parts fiche anywhere, it's hard to be able to work out how many other parts have changed from the 2010-2016 standards.
Dubai1100, I'd suggest an email to Takashi at Samurider who will know about the 2017 Standard model and what parts are available to fit.
He says it's as you say - 2017 Standard model.
He says it's as you say - 2017 Standard model.
Cool. I suppose that implies the chrome exhaust system too.
(03-24-2019, 09:02 PM)GoldOxide_imp Wrote: [ -> ] (03-24-2019, 04:08 PM)Dubai1100_imp Wrote: [ -> ] (03-24-2019, 08:32 AM)Cormanus_imp Wrote: [ -> ]Ah! This might turn out to be the first 2017 CB1100 Standard model reported outside Japan. It has the traditional shaped tank and twin exhausts. In the absence f being able to find one on a parts fiche anywhere, it's hard to be able to work out how many other parts have changed from the 2010-2016 standards.
Dubai1100, I'd suggest an email to Takashi at Samurider who will know about the 2017 Standard model and what parts are available to fit.
He says it's as you say - 2017 Standard model.
He says it's as you say - 2017 Standard model.
Cool. I suppose that implies the chrome exhaust system too.
He says it's as you say - 2017 Standard model.
Cool. I suppose that implies the chrome exhaust system too.
Yep - chrome twin pipes.
There is also this option:
https://rover.ebay.com/rover/0/0/0?mpre=...2429707607
They were designed for the 2010-2016 Std/dlx models but I did a test fit on my 2017 EX since i am local to the seller and it fit with spacers to push the taillight away from the grab bar. Since you don't have a grab bar, it should work.
(04-03-2019, 04:11 AM)kennyw_imp Wrote: [ -> ]There is also this option: https://rover.ebay.com/rover/0/0/0?mpre=...2429707607
They were designed for the 2010-2016 Std/dlx models but I did a test fit on my 2017 EX since i am local to the seller and it fit with spacers to push the taillight away from the grab bar. Since you don't have a grab bar, it should work.
Thanks - bought it now and it's on the way from Japan. Will post pics when get it fitted with the Whitehouse cafe front fender as well.
(03-23-2019, 11:19 PM)Dubai1100_imp Wrote: [ -> ]Hi everyone - first post so please be gentle.
I've just bought a 2017 model and want to get rid of the rear fender as I prefer the look without. I live in Dubai so no need for it as well as it only rains 4-5 times a year.
Looking on Samurider, there are 2 kits but one says "US version 2010-2016" and the other is for EX/RS models and requires additional grab rails.
Can anybody confirm what version I should buy? The picture below most closely resembles mine but TBH I haven't seen any model that looks like it on the web.
Mine has 2 exhaust pipes but not LEDs or slipper clutch. The cooling fins are black and so is the triangular cover with "CB1100" on it. I also have "Honda" stamped on the round bit of metal near where the right foot rests (as you can tell - I know nothing about bikes)
Many thanks.
![[Image: 791751c9eb70c58361c49675a22dcbeb.jpg?wid...e=false%27]](https://cb1100forum.net/forum/uploads/imp/791751c9eb70c58361c49675a22dcbeb.jpg?width=640&height=480&mode=max&upscale=false%27)
Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible
(10-28-2019, 05:29 PM)Moe_rider_imp Wrote: [ -> ] (03-23-2019, 11:19 PM)Dubai1100_imp Wrote: [ -> ]Hi everyone - first post so please be gentle.
I've just bought a 2017 model and want to get rid of the rear fender as I prefer the look without. I live in Dubai so no need for it as well as it only rains 4-5 times a year.
Looking on Samurider, there are 2 kits but one says "US version 2010-2016" and the other is for EX/RS models and requires additional grab rails.
Can anybody confirm what version I should buy? The picture below most closely resembles mine but TBH I haven't seen any model that looks like it on the web.
Mine has 2 exhaust pipes but not LEDs or slipper clutch. The cooling fins are black and so is the triangular cover with "CB1100" on it. I also have "Honda" stamped on the round bit of metal near where the right foot rests (as you can tell - I know nothing about bikes)
Many thanks.
Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible
Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible
Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible
Get in touch with Samurider and they will advise if you give them chassis number etc. The fenders look great by the way.
Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible
Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible
Get in touch with Samurider and they will advise if you give them chassis number etc. The fenders look great by the way.
(10-28-2019, 05:38 PM)Dubai1100_imp Wrote: [ -> ] (10-28-2019, 05:29 PM)Moe_rider_imp Wrote: [ -> ] (03-23-2019, 11:19 PM)Dubai1100_imp Wrote: [ -> ]Hi everyone - first post so please be gentle.
I've just bought a 2017 model and want to get rid of the rear fender as I prefer the look without. I live in Dubai so no need for it as well as it only rains 4-5 times a year.
Looking on Samurider, there are 2 kits but one says "US version 2010-2016" and the other is for EX/RS models and requires additional grab rails.
Can anybody confirm what version I should buy? The picture below most closely resembles mine but TBH I haven't seen any model that looks like it on the web.
Mine has 2 exhaust pipes but not LEDs or slipper clutch. The cooling fins are black and so is the triangular cover with "CB1100" on it. I also have "Honda" stamped on the round bit of metal near where the right foot rests (as you can tell - I know nothing about bikes)
Many thanks.
Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible
Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible
Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible
Get in touch with Samurider and they will advise if you give them chassis number etc. The fenders look great by the way.
Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible
Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible
Get in touch with Samurider and they will advise if you give them chassis number etc. The fenders look great by the way.
Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible
(10-28-2019, 05:38 PM)Dubai1100_imp Wrote: [ -> ] (10-28-2019, 05:29 PM)Moe_rider_imp Wrote: [ -> ] (03-23-2019, 11:19 PM)Dubai1100_imp Wrote: [ -> ]Hi everyone - first post so please be gentle.
I've just bought a 2017 model and want to get rid of the rear fender as I prefer the look without. I live in Dubai so no need for it as well as it only rains 4-5 times a year.
Looking on Samurider, there are 2 kits but one says "US version 2010-2016" and the other is for EX/RS models and requires additional grab rails.
Can anybody confirm what version I should buy? The picture below most closely resembles mine but TBH I haven't seen any model that looks like it on the web.
Mine has 2 exhaust pipes but not LEDs or slipper clutch. The cooling fins are black and so is the triangular cover with "CB1100" on it. I also have "Honda" stamped on the round bit of metal near where the right foot rests (as you can tell - I know nothing about bikes)
Many thanks.
Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible
Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible
Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible
Get in touch with Samurider and they will advise if you give them chassis number etc. The fenders look great by the way.
Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible
Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible
Get in touch with Samurider and they will advise if you give them chassis number etc. The fenders look great by the way.
Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible
Get in touch with Samurider and they will advise if you give them chassis number etc. The fenders look great by the way.
(10-28-2019, 05:38 PM)Dubai1100_imp Wrote: [ -> ] (10-28-2019, 05:29 PM)Moe_rider_imp Wrote: [ -> ] (03-23-2019, 11:19 PM)Dubai1100_imp Wrote: [ -> ]Hi everyone - first post so please be gentle.
I've just bought a 2017 model and want to get rid of the rear fender as I prefer the look without. I live in Dubai so no need for it as well as it only rains 4-5 times a year.
Looking on Samurider, there are 2 kits but one says "US version 2010-2016" and the other is for EX/RS models and requires additional grab rails.
Can anybody confirm what version I should buy? The picture below most closely resembles mine but TBH I haven't seen any model that looks like it on the web.
Mine has 2 exhaust pipes but not LEDs or slipper clutch. The cooling fins are black and so is the triangular cover with "CB1100" on it. I also have "Honda" stamped on the round bit of metal near where the right foot rests (as you can tell - I know nothing about bikes)
Many thanks.
Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible
Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible
Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible
Get in touch with Samurider and they will advise if you give them chassis number etc. The fenders look great by the way.
Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible
Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible
Get in touch with Samurider and they will advise if you give them chassis number etc. The fenders look great by the way.
Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible
(10-28-2019, 05:38 PM)Dubai1100_imp Wrote: [ -> ] (10-28-2019, 05:29 PM)Moe_rider_imp Wrote: [ -> ] (03-23-2019, 11:19 PM)Dubai1100_imp Wrote: [ -> ]Hi everyone - first post so please be gentle.
I've just bought a 2017 model and want to get rid of the rear fender as I prefer the look without. I live in Dubai so no need for it as well as it only rains 4-5 times a year.
Looking on Samurider, there are 2 kits but one says "US version 2010-2016" and the other is for EX/RS models and requires additional grab rails.
Can anybody confirm what version I should buy? The picture below most closely resembles mine but TBH I haven't seen any model that looks like it on the web.
Mine has 2 exhaust pipes but not LEDs or slipper clutch. The cooling fins are black and so is the triangular cover with "CB1100" on it. I also have "Honda" stamped on the round bit of metal near where the right foot rests (as you can tell - I know nothing about bikes)
Many thanks.
Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible
Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible
Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible
Get in touch with Samurider and they will advise if you give them chassis number etc. The fenders look great by the way.
Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible
Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible
Get in touch with Samurider and they will advise if you give them chassis number etc. The fenders look great by the way.
Hi did you find a solution to the fender? Am buying a 2017 RS and would like to do the same! But instead add an LED HOOP tail light by replacing handle frame if possible
Get in touch with Samurider and they will advise if you give them chassis number etc. The fenders look great by the way.
The bike is beautiful as is but I’d like to customize and that’s mainly why am going to buy one. Already have two other bikes lol
See if this fits your needs:
[url=https://www.ebay.com/i/202429707607?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=202429707607&targetid=475515324381&device=c&mktype=pla&googleloc=9009971&poi=&campaignid=6469750705&mkgroupid=78329391340&rlsatarget=pla-475515324381&abcId=1141176&merchantid=6296724&gclid=Cj0KCQjwjOrtBRCcARIsAEq4rW5siC_jS6v_YrjaMgq1-XLw2RpV5jUwDYnpsbncShEk9ShvdtbDOpwaAn72EALw_wcB]Ebay CB1100 Fender Eliminator 2010-2018