Have not started this project yet, just thinking of it during lonely winter days and sharing with others...
Models 2014 & up have very small and hard to be seen turn indicators, especially during sunny days. Audible device doesn't work for me due to hearing loss and ear plugs installed while riding.
I am not crazy about self canceling t-signal module, but cannot rule it out.
https://www.amazon.ca/Smart-Turn-System-...B06XD71KSW
https://www.youtube.com/watch?v=vZct5aRQwUI
Plan to add some additional, waterproof, high visibility 12V LED indicators.
Waterproof LEDs with wire extension can be bought from eBay, or other source.
https://www.ebay.com/itm/5-BBT-12-volt-W...5731.m3795
First, it needs to make a model/CAD*, then 3D printer* to build L & R mini boxes/bezels as per pic. Once everything is ready, simple, parallel electrical hook up to the existing t-signal circuit, in order to function.
![[Image: bafe0073392e2fbe840fc2f1c8e6d127.png]](https://cb1100forum.net/forum/uploads/imp/201912/bafe0073392e2fbe840fc2f1c8e6d127.png)
Side note: hope, not to get too lazy with this project.
* Members, who have no access to CAD & 3D printer may use a simple plastic or alloy bracket for similar fitment.
(12-08-2019, 04:34 AM)peterbaron_imp Wrote: [ -> ]Have not started this project yet, just thinking of it during lonely winter days and sharing with others...
Models 2014 & up have very small and hard to be seen turn indicators, especially during sunny days. Audible device doesn't work for me due to hearing loss and ear plugs installed while riding.
I am not crazy about self canceling t-signal module, but cannot rule it out.
https://www.amazon.ca/Smart-Turn-System-...B06XD71KSW
https://www.youtube.com/watch?v=vZct5aRQwUI
Plan to add some additional, waterproof, high visibility 12V LED indicators.
Waterproof LEDs with wire extension can be bought from eBay, or other source.
https://www.ebay.com/itm/5-BBT-12-volt-W...5731.m3795
First, it needs to make a model/CAD*, then 3D printer* to build L & R mini boxes/bezels as per pic. Once everything is ready, simple, parallel electrical hook up to the existing t-signal circuit, in order to function.
Side note: hope, not to get too lazy with this project.
* Members, who have no access to CAD & 3D printer may use a simple plastic or alloy bracket for similar fitment.
You can't get lazy. There is the big H O N D A project to do.
(12-08-2019, 04:34 AM)peterbaron_imp Wrote: [ -> ]Have not started this project yet, just thinking of it during lonely winter days and sharing with others...
Models 2014 & up have very small and hard to be seen turn indicators, especially during sunny days. Audible device doesn't work for me due to hearing loss and ear plugs installed while riding.
I am not crazy about self canceling t-signal module, but cannot rule it out.
https://www.amazon.ca/Smart-Turn-System-...B06XD71KSW
https://www.youtube.com/watch?v=vZct5aRQwUI
Plan to add some additional, waterproof, high visibility 12V LED indicators.
Waterproof LEDs with wire extension can be bought from eBay, or other source.
https://www.ebay.com/itm/5-BBT-12-volt-W...5731.m3795
First, it needs to make a model/CAD*, then 3D printer* to build L & R mini boxes/bezels as per pic. Once everything is ready, simple, parallel electrical hook up to the existing t-signal circuit, in order to function.
Side note: hope, not to get too lazy with this project.
* Members, who have no access to CAD & 3D printer may use a simple plastic or alloy bracket for similar fitment.
I believe there are services where online sketches (drawings) can be done free and submitted to online 3D printers (for a fee).
(12-08-2019, 06:22 AM)GoldOxide_imp Wrote: [ -> ] (12-08-2019, 04:34 AM)peterbaron_imp Wrote: [ -> ]Have not started this project yet, just thinking of it during lonely winter days and sharing with others...
Models 2014 & up have very small and hard to be seen turn indicators, especially during sunny days. Audible device doesn't work for me due to hearing loss and ear plugs installed while riding.
I am not crazy about self canceling t-signal module, but cannot rule it out.
https://www.amazon.ca/Smart-Turn-System-...B06XD71KSW
https://www.youtube.com/watch?v=vZct5aRQwUI
Plan to add some additional, waterproof, high visibility 12V LED indicators.
Waterproof LEDs with wire extension can be bought from eBay, or other source.
https://www.ebay.com/itm/5-BBT-12-volt-W...5731.m3795
First, it needs to make a model/CAD*, then 3D printer* to build L & R mini boxes/bezels as per pic. Once everything is ready, simple, parallel electrical hook up to the existing t-signal circuit, in order to function.
Side note: hope, not to get too lazy with this project.
* Members, who have no access to CAD & 3D printer may use a simple plastic or alloy bracket for similar fitment.
You can't get lazy. There is the big H O N D A project to do.
(12-08-2019, 04:34 AM)peterbaron_imp Wrote: [ -> ]Have not started this project yet, just thinking of it during lonely winter days and sharing with others...
Models 2014 & up have very small and hard to be seen turn indicators, especially during sunny days. Audible device doesn't work for me due to hearing loss and ear plugs installed while riding.
I am not crazy about self canceling t-signal module, but cannot rule it out.
https://www.amazon.ca/Smart-Turn-System-...B06XD71KSW
https://www.youtube.com/watch?v=vZct5aRQwUI
Plan to add some additional, waterproof, high visibility 12V LED indicators.
Waterproof LEDs with wire extension can be bought from eBay, or other source.
https://www.ebay.com/itm/5-BBT-12-volt-W...5731.m3795
First, it needs to make a model/CAD*, then 3D printer* to build L & R mini boxes/bezels as per pic. Once everything is ready, simple, parallel electrical hook up to the existing t-signal circuit, in order to function.
Side note: hope, not to get too lazy with this project.
* Members, who have no access to CAD & 3D printer may use a simple plastic or alloy bracket for similar fitment.
I believe there are services where online sketches (drawings) can be done free and submitted to online 3D printers (for a fee).
You can't get lazy. There is the big H O N D A project to do.
(12-08-2019, 04:34 AM)peterbaron_imp Wrote: [ -> ]Have not started this project yet, just thinking of it during lonely winter days and sharing with others...
Models 2014 & up have very small and hard to be seen turn indicators, especially during sunny days. Audible device doesn't work for me due to hearing loss and ear plugs installed while riding.
I am not crazy about self canceling t-signal module, but cannot rule it out.
https://www.amazon.ca/Smart-Turn-System-...B06XD71KSW
https://www.youtube.com/watch?v=vZct5aRQwUI
Plan to add some additional, waterproof, high visibility 12V LED indicators.
Waterproof LEDs with wire extension can be bought from eBay, or other source.
https://www.ebay.com/itm/5-BBT-12-volt-W...5731.m3795
First, it needs to make a model/CAD*, then 3D printer* to build L & R mini boxes/bezels as per pic. Once everything is ready, simple, parallel electrical hook up to the existing t-signal circuit, in order to function.
Side note: hope, not to get too lazy with this project.
* Members, who have no access to CAD & 3D printer may use a simple plastic or alloy bracket for similar fitment.
I believe there are services where online sketches (drawings) can be done free and submitted to online 3D printers (for a fee).
1* As to "BIG" Honda project, research is completed....and the easiest one = takes 1/2 hr to assemble/install it.
Now has to stay in a "cool down brain cell" and final decision will be made Feb/March, as winter end brings more energy to do something
2* Good news that 3D printing is widely accessed.
You know, every dollar pumped int motorcycle is considered lost
(12-08-2019, 06:36 AM)peterbaron_imp Wrote: [ -> ] (12-08-2019, 06:22 AM)GoldOxide_imp Wrote: [ -> ] (12-08-2019, 04:34 AM)peterbaron_imp Wrote: [ -> ]Have not started this project yet, just thinking of it during lonely winter days and sharing with others...
Models 2014 & up have very small and hard to be seen turn indicators, especially during sunny days. Audible device doesn't work for me due to hearing loss and ear plugs installed while riding.
I am not crazy about self canceling t-signal module, but cannot rule it out.
https://www.amazon.ca/Smart-Turn-System-...B06XD71KSW
https://www.youtube.com/watch?v=vZct5aRQwUI
Plan to add some additional, waterproof, high visibility 12V LED indicators.
Waterproof LEDs with wire extension can be bought from eBay, or other source.
https://www.ebay.com/itm/5-BBT-12-volt-W...5731.m3795
First, it needs to make a model/CAD*, then 3D printer* to build L & R mini boxes/bezels as per pic. Once everything is ready, simple, parallel electrical hook up to the existing t-signal circuit, in order to function.
Side note: hope, not to get too lazy with this project.
* Members, who have no access to CAD & 3D printer may use a simple plastic or alloy bracket for similar fitment.
You can't get lazy. There is the big H O N D A project to do.
(12-08-2019, 04:34 AM)peterbaron_imp Wrote: [ -> ]Have not started this project yet, just thinking of it during lonely winter days and sharing with others...
Models 2014 & up have very small and hard to be seen turn indicators, especially during sunny days. Audible device doesn't work for me due to hearing loss and ear plugs installed while riding.
I am not crazy about self canceling t-signal module, but cannot rule it out.
https://www.amazon.ca/Smart-Turn-System-...B06XD71KSW
https://www.youtube.com/watch?v=vZct5aRQwUI
Plan to add some additional, waterproof, high visibility 12V LED indicators.
Waterproof LEDs with wire extension can be bought from eBay, or other source.
https://www.ebay.com/itm/5-BBT-12-volt-W...5731.m3795
First, it needs to make a model/CAD*, then 3D printer* to build L & R mini boxes/bezels as per pic. Once everything is ready, simple, parallel electrical hook up to the existing t-signal circuit, in order to function.
Side note: hope, not to get too lazy with this project.
* Members, who have no access to CAD & 3D printer may use a simple plastic or alloy bracket for similar fitment.
I believe there are services where online sketches (drawings) can be done free and submitted to online 3D printers (for a fee).
You can't get lazy. There is the big H O N D A project to do.
(12-08-2019, 04:34 AM)peterbaron_imp Wrote: [ -> ]Have not started this project yet, just thinking of it during lonely winter days and sharing with others...
Models 2014 & up have very small and hard to be seen turn indicators, especially during sunny days. Audible device doesn't work for me due to hearing loss and ear plugs installed while riding.
I am not crazy about self canceling t-signal module, but cannot rule it out.
https://www.amazon.ca/Smart-Turn-System-...B06XD71KSW
https://www.youtube.com/watch?v=vZct5aRQwUI
Plan to add some additional, waterproof, high visibility 12V LED indicators.
Waterproof LEDs with wire extension can be bought from eBay, or other source.
https://www.ebay.com/itm/5-BBT-12-volt-W...5731.m3795
First, it needs to make a model/CAD*, then 3D printer* to build L & R mini boxes/bezels as per pic. Once everything is ready, simple, parallel electrical hook up to the existing t-signal circuit, in order to function.
Side note: hope, not to get too lazy with this project.
* Members, who have no access to CAD & 3D printer may use a simple plastic or alloy bracket for similar fitment.
I believe there are services where online sketches (drawings) can be done free and submitted to online 3D printers (for a fee).
1* As to "BIG" Honda project, research is completed....and the easiest one = takes 1/2 hr to assemble/install it.
Now has to stay in a "cool down brain cell" and final decision will be made Feb/March, as winter end brings more energy to do something
2* Good news that 3D printing is widely accessed.
You know, every dollar pumped int motorcycle is considered lost
Yeah, m/c'ing in North America can be easily viewed as discretionary. This is unlike many Asian countries where livelihood commonly depends on the reliability and effectiveness of the machine.
I don't consider owning a m/c excessive, but that is a matter of perspective I suppose. Nevertheless, yes PB (aka DV).
(12-08-2019, 06:41 AM)GoldOxide_imp Wrote: [ -> ] (12-08-2019, 06:36 AM)peterbaron_imp Wrote: [ -> ] (12-08-2019, 06:22 AM)GoldOxide_imp Wrote: [ -> ] (12-08-2019, 04:34 AM)peterbaron_imp Wrote: [ -> ]Have not started this project yet, just thinking of it during lonely winter days and sharing with others...
Models 2014 & up have very small and hard to be seen turn indicators, especially during sunny days. Audible device doesn't work for me due to hearing loss and ear plugs installed while riding.
I am not crazy about self canceling t-signal module, but cannot rule it out.
https://www.amazon.ca/Smart-Turn-System-...B06XD71KSW
https://www.youtube.com/watch?v=vZct5aRQwUI
Plan to add some additional, waterproof, high visibility 12V LED indicators.
Waterproof LEDs with wire extension can be bought from eBay, or other source.
https://www.ebay.com/itm/5-BBT-12-volt-W...5731.m3795
First, it needs to make a model/CAD*, then 3D printer* to build L & R mini boxes/bezels as per pic. Once everything is ready, simple, parallel electrical hook up to the existing t-signal circuit, in order to function.
Side note: hope, not to get too lazy with this project.
* Members, who have no access to CAD & 3D printer may use a simple plastic or alloy bracket for similar fitment.
You can't get lazy. There is the big H O N D A project to do.
(12-08-2019, 04:34 AM)peterbaron_imp Wrote: [ -> ]Have not started this project yet, just thinking of it during lonely winter days and sharing with others...
Models 2014 & up have very small and hard to be seen turn indicators, especially during sunny days. Audible device doesn't work for me due to hearing loss and ear plugs installed while riding.
I am not crazy about self canceling t-signal module, but cannot rule it out.
https://www.amazon.ca/Smart-Turn-System-...B06XD71KSW
https://www.youtube.com/watch?v=vZct5aRQwUI
Plan to add some additional, waterproof, high visibility 12V LED indicators.
Waterproof LEDs with wire extension can be bought from eBay, or other source.
https://www.ebay.com/itm/5-BBT-12-volt-W...5731.m3795
First, it needs to make a model/CAD*, then 3D printer* to build L & R mini boxes/bezels as per pic. Once everything is ready, simple, parallel electrical hook up to the existing t-signal circuit, in order to function.
Side note: hope, not to get too lazy with this project.
* Members, who have no access to CAD & 3D printer may use a simple plastic or alloy bracket for similar fitment.
I believe there are services where online sketches (drawings) can be done free and submitted to online 3D printers (for a fee).
You can't get lazy. There is the big H O N D A project to do.
(12-08-2019, 04:34 AM)peterbaron_imp Wrote: [ -> ]Have not started this project yet, just thinking of it during lonely winter days and sharing with others...
Models 2014 & up have very small and hard to be seen turn indicators, especially during sunny days. Audible device doesn't work for me due to hearing loss and ear plugs installed while riding.
I am not crazy about self canceling t-signal module, but cannot rule it out.
https://www.amazon.ca/Smart-Turn-System-...B06XD71KSW
https://www.youtube.com/watch?v=vZct5aRQwUI
Plan to add some additional, waterproof, high visibility 12V LED indicators.
Waterproof LEDs with wire extension can be bought from eBay, or other source.
https://www.ebay.com/itm/5-BBT-12-volt-W...5731.m3795
First, it needs to make a model/CAD*, then 3D printer* to build L & R mini boxes/bezels as per pic. Once everything is ready, simple, parallel electrical hook up to the existing t-signal circuit, in order to function.
Side note: hope, not to get too lazy with this project.
* Members, who have no access to CAD & 3D printer may use a simple plastic or alloy bracket for similar fitment.
I believe there are services where online sketches (drawings) can be done free and submitted to online 3D printers (for a fee).
1* As to "BIG" Honda project, research is completed....and the easiest one = takes 1/2 hr to assemble/install it.
Now has to stay in a "cool down brain cell" and final decision will be made Feb/March, as winter end brings more energy to do something
2* Good news that 3D printing is widely accessed.
You know, every dollar pumped int motorcycle is considered lost
Yeah, m/c'ing in North America can be easily viewed as discretionary. This is unlike many Asian countries where livelihood commonly depends on the reliability and effectiveness of the machine.
I don't consider owning a m/c excessive, but that is a matter of perspective I suppose. Nevertheless, yes PB (aka DV).
Yeah, m/c'ing in North America can be easily viewed as discretionary. This is unlike many Asian countries where livelihood commonly depends on the reliability and effectiveness of the machine.
I don't consider owning a m/c excessive, but that is a matter of perspective I suppose. Nevertheless, yes PB (aka DV).
....check and read avatar
(12-08-2019, 08:21 AM)peterbaron_imp Wrote: [ -> ] (12-08-2019, 06:41 AM)GoldOxide_imp Wrote: [ -> ] (12-08-2019, 06:36 AM)peterbaron_imp Wrote: [ -> ] (12-08-2019, 06:22 AM)GoldOxide_imp Wrote: [ -> ] (12-08-2019, 04:34 AM)peterbaron_imp Wrote: [ -> ]Have not started this project yet, just thinking of it during lonely winter days and sharing with others...
Models 2014 & up have very small and hard to be seen turn indicators, especially during sunny days. Audible device doesn't work for me due to hearing loss and ear plugs installed while riding.
I am not crazy about self canceling t-signal module, but cannot rule it out.
https://www.amazon.ca/Smart-Turn-System-...B06XD71KSW
https://www.youtube.com/watch?v=vZct5aRQwUI
Plan to add some additional, waterproof, high visibility 12V LED indicators.
Waterproof LEDs with wire extension can be bought from eBay, or other source.
https://www.ebay.com/itm/5-BBT-12-volt-W...5731.m3795
First, it needs to make a model/CAD*, then 3D printer* to build L & R mini boxes/bezels as per pic. Once everything is ready, simple, parallel electrical hook up to the existing t-signal circuit, in order to function.
Side note: hope, not to get too lazy with this project.
* Members, who have no access to CAD & 3D printer may use a simple plastic or alloy bracket for similar fitment.
You can't get lazy. There is the big H O N D A project to do.
(12-08-2019, 04:34 AM)peterbaron_imp Wrote: [ -> ]Have not started this project yet, just thinking of it during lonely winter days and sharing with others...
Models 2014 & up have very small and hard to be seen turn indicators, especially during sunny days. Audible device doesn't work for me due to hearing loss and ear plugs installed while riding.
I am not crazy about self canceling t-signal module, but cannot rule it out.
https://www.amazon.ca/Smart-Turn-System-...B06XD71KSW
https://www.youtube.com/watch?v=vZct5aRQwUI
Plan to add some additional, waterproof, high visibility 12V LED indicators.
Waterproof LEDs with wire extension can be bought from eBay, or other source.
https://www.ebay.com/itm/5-BBT-12-volt-W...5731.m3795
First, it needs to make a model/CAD*, then 3D printer* to build L & R mini boxes/bezels as per pic. Once everything is ready, simple, parallel electrical hook up to the existing t-signal circuit, in order to function.
Side note: hope, not to get too lazy with this project.
* Members, who have no access to CAD & 3D printer may use a simple plastic or alloy bracket for similar fitment.
I believe there are services where online sketches (drawings) can be done free and submitted to online 3D printers (for a fee).
You can't get lazy. There is the big H O N D A project to do.
(12-08-2019, 04:34 AM)peterbaron_imp Wrote: [ -> ]Have not started this project yet, just thinking of it during lonely winter days and sharing with others...
Models 2014 & up have very small and hard to be seen turn indicators, especially during sunny days. Audible device doesn't work for me due to hearing loss and ear plugs installed while riding.
I am not crazy about self canceling t-signal module, but cannot rule it out.
https://www.amazon.ca/Smart-Turn-System-...B06XD71KSW
https://www.youtube.com/watch?v=vZct5aRQwUI
Plan to add some additional, waterproof, high visibility 12V LED indicators.
Waterproof LEDs with wire extension can be bought from eBay, or other source.
https://www.ebay.com/itm/5-BBT-12-volt-W...5731.m3795
First, it needs to make a model/CAD*, then 3D printer* to build L & R mini boxes/bezels as per pic. Once everything is ready, simple, parallel electrical hook up to the existing t-signal circuit, in order to function.
Side note: hope, not to get too lazy with this project.
* Members, who have no access to CAD & 3D printer may use a simple plastic or alloy bracket for similar fitment.
I believe there are services where online sketches (drawings) can be done free and submitted to online 3D printers (for a fee).
1* As to "BIG" Honda project, research is completed....and the easiest one = takes 1/2 hr to assemble/install it.
Now has to stay in a "cool down brain cell" and final decision will be made Feb/March, as winter end brings more energy to do something
2* Good news that 3D printing is widely accessed.
You know, every dollar pumped int motorcycle is considered lost
Yeah, m/c'ing in North America can be easily viewed as discretionary. This is unlike many Asian countries where livelihood commonly depends on the reliability and effectiveness of the machine.
I don't consider owning a m/c excessive, but that is a matter of perspective I suppose. Nevertheless, yes PB (aka DV).
Yeah, m/c'ing in North America can be easily viewed as discretionary. This is unlike many Asian countries where livelihood commonly depends on the reliability and effectiveness of the machine.
I don't consider owning a m/c excessive, but that is a matter of perspective I suppose. Nevertheless, yes PB (aka DV).
....check and read avatar
Alright, you twisted my arm PB (aka DF).