The CB1100 Community Forum

[/i]Looks like everyone is out of stock. I have contacted JP cycles to see if they have one that fits my bike. Thanks.

I have my remote attached to the tach face with velcro.

I went with http://www.mo-door.com/. Works great and is completely hidden.

That thing is pretty cool and a great alternative to the Flash2Pass

Ya. It's not cheap, but what on a motorcycle is... Also you do not wire into the bike's electrical system at all. Install literally was find where I wanted the button and make sure that is where the sticky side of the button goes.

Seems like I'll be doing this mod on my bike for both convenience, and bragging rights, mostly the latter

Anyone successfully done it?

I just attached my remotes to the bottom of the tank just behind the engine with velcro. One side has the remote the gate to my complex, the other side is for the garage. As I approach either, I just reach under the tank and hit the appropriate one. Did that to both of my bikes. There's more of a lip under the Triumph tank, so they are both completely hidden, just barely visible on the CB, but you just see the edges of small black boxes, you can't tell they are remotes. Had to order smaller remotes on Ebay, that was no big deal.

I'm currently using something very similar, which is one of these smaller size 300mHz attached to my key(hanging on the ignition)
[url=https://www.amazon.com/Compatible-Firefly-300mhz-dip-keychain/dp/B003F7K7VC/ref=sr_1_40?keywords=garage+door+keychain&qid=1578007602&sr=8-40]https://www.amazon.com/Compatible-Firefl...02&sr=8-40

While this does the job, I'm looking into retrofitting the mechanism into the handle bar switches for a more integrated look, since I will be swapping switcherie and some wiring action will already be taking place.

Being able to just vanish into the alleyway that leads to my building garage, without having to physically unclip from either handle bar, will make me feel like Batman

(01-02-2020, 12:38 PM)Cormanus_imp Wrote: [ -> ]http://cb1100forum.com/forum/showthread....8#pid38238

Went throught that thread- this was the best post I was able to find
http://cb1100forum.com/forum/showthread....8#pid38238