The CB1100 Community Forum

look into the sw motech EVO side carrier / rack:
,

link:
https://sw-motech.us/bike/HONDA/CB1100/2...023365.htm


those side racks have pre punched holes to bolt on the givi monokey mounts:


Link:
https://sw-motech.us/bike/HONDA/CB1100/2...007853.htm


here you can see those Givi monokey hardware parts (triangle clamp on top bar, two mushroom pegs at bottom, 4 rubber bumpers on sides ) fastened to the EVO racks:


i have the EVO racks on my cb1100 , with the givi hardware per above, i have mounted a set of givi e22 (same as e21, different lid) on my bike.

I have these SW Motech EVO side carrier/rack and made total of 70 Kms = NO complaints, excellent !

Thanks, for the replies and sorry for not posting sooner. Yes, I have been a member for a long time but have never really posted. I bought a 2014 over the weekend so I will be an active member going forward.

I looked on SW Motech's web site and the rack are not available. I will have to check some of the other links. Hopefully I can find a set for sale somewhere.

Did you check SW Motech - Germany or Twisted Throttle/USA or Canada...eBay???

Here is my bike by the way.

(08-26-2020, 05:02 AM)peterbaron_imp Wrote: [ -> ]Did you check SW Motech - Germany or Twisted Throttle/USA or Canada...eBay???

I checked Twisted Throttle a few weeks ago but now that I have an actual item # to search for I may have better luck

Trapezoid shape side racks are more universal, the biggest issue might be with the hardware for your '14 CB...it also fits '13 model. I did transfer from the '13 onto the '14 = no issue.
May this help you more/better?:









For these ^^ side racks, I use pictured bellow AERO side panniers , also by SW Motech:







And this is how they look on my bike







Make sure you get the side racks with hardware matching your side panniers...otherwise may not work together.
There might be some other options by SW-Motech or different companies. Check.
Good luck!!

I found some SW Motech racks on Amazon. Price seems to be way jacked up though. I guess I will have to relocate my rear blinkers. Has anyone done that?

First pic below is a U shape bracket with 6 holes, OEM SW-Motech.
You can easily make it by urself from a nice piece of metal strap, shape it, fold it and drill 6 holes of different diameter: 2 bottom for the U shape bracket holding bolts, 2+2 wing side L+R to accommodate the turn signals. If you chose this design, you'll have to make one side turn signal's harness longer by about 1 foot, and I believe is the R-side, as the turn signals harness runs on the L side of rear fender, then you have to drill a hole below the stop light - in lamp's black housing to run the turn signal wires through it.
Here are some orientation pics:









This is what I did with my OEM SW Motech.

You may go alternate way and see if lic plate bracket + home made extension can accommodate relocated turn signals + both T-signals harness extension by 1-2 feet

That is awesome. Thank you

Far as I can tell, the EVO side racks have been discontinued.