The CB1100 Community Forum

(02-12-2021, 04:02 AM)mvk24_imp Wrote: [ -> ]Mine are already on the bike so it wouldn't be possible to stretch it out on the fork to get a length measurement for you. However this is the exact listing I ordered.. for 24$ by the time you measure the diameters for something cheaper it could already be shipped to ya . https://www.ebay.com/itm/162276226225

Sent from my SM-G965U1 using Tapatalk
Those gaiters on my bike

Sent from my SM-G965U1 using Tapatalk
Aside from looks they will also help keep those fork seals cleaner for longer, before I installed i made sure I wiped the fork tube down with some corrosion inhibiter. However it had a great seal to the fork to keep water out, they have a hole at the bottom to allow any moisture to drain out though as a fail safe.

Sent from my SM-G965U1 using Tapatalk

Thanks for the info! The only issue I see is that I would have to pay more for shipping than for the gaiters!

(02-12-2021, 07:53 AM)bioman_imp Wrote: [ -> ]

(02-12-2021, 04:02 AM)mvk24_imp Wrote: [ -> ]Mine are already on the bike so it wouldn't be possible to stretch it out on the fork to get a length measurement for you. However this is the exact listing I ordered.. for 24$ by the time you measure the diameters for something cheaper it could already be shipped to ya . https://www.ebay.com/itm/162276226225

Sent from my SM-G965U1 using Tapatalk
Those gaiters on my bike

Sent from my SM-G965U1 using Tapatalk
Aside from looks they will also help keep those fork seals cleaner for longer, before I installed i made sure I wiped the fork tube down with some corrosion inhibiter. However it had a great seal to the fork to keep water out, they have a hole at the bottom to allow any moisture to drain out though as a fail safe.

Sent from my SM-G965U1 using Tapatalk

Thanks for the info! The only issue I see is that I would have to pay more for shipping than for the gaiters!

Thanks for the info! The only issue I see is that I would have to pay more for shipping than for the gaiters!

Ah, sorry I forgot about the different locations we live.

Sent from my SM-G965U1 using Tapatalk

(02-12-2021, 06:26 AM)mvk24_imp Wrote: [ -> ]

(02-12-2021, 05:28 AM)Rocky_imp Wrote: [ -> ]Triumph gaiters are what I installed on my CB - and my Triumph too

How do you like the tank pads? I was thinking of getting them for mine.

Sent from my SM-G965U1 using Tapatalk

How do you like the tank pads? I was thinking of getting them for mine.

Sent from my SM-G965U1 using Tapatalk
The tank pads were cut from magnetic sheets I bought from MagKnight.
A few years ago one of the members here posted a pattern and I used that as my guide.
They stick in place very well and have never moved.

(02-12-2021, 10:37 PM)Rocky_imp Wrote: [ -> ]

(02-12-2021, 06:26 AM)mvk24_imp Wrote: [ -> ]

(02-12-2021, 05:28 AM)Rocky_imp Wrote: [ -> ]Triumph gaiters are what I installed on my CB - and my Triumph too

How do you like the tank pads? I was thinking of getting them for mine.

Sent from my SM-G965U1 using Tapatalk

How do you like the tank pads? I was thinking of getting them for mine.

Sent from my SM-G965U1 using Tapatalk
The tank pads were cut from magnetic sheets I bought from MagKnight.
A few years ago one of the members here posted a pattern and I used that as my guide.
They stick in place very well and have never moved.

How do you like the tank pads? I was thinking of getting them for mine.

Sent from my SM-G965U1 using Tapatalk
The tank pads were cut from magnetic sheets I bought from MagKnight.
A few years ago one of the members here posted a pattern and I used that as my guide.
They stick in place very well and have never moved. Thats a cool idea, where did you get the Magnetic sheets?

Sent from my SM-G965U1 using Tapatalk

(02-13-2021, 12:43 AM)mvk24_imp Wrote: [ -> ]

(02-12-2021, 10:37 PM)Rocky_imp Wrote: [ -> ]

(02-12-2021, 06:26 AM)mvk24_imp Wrote: [ -> ]

(02-12-2021, 05:28 AM)Rocky_imp Wrote: [ -> ]Triumph gaiters are what I installed on my CB - and my Triumph too

How do you like the tank pads? I was thinking of getting them for mine.

Sent from my SM-G965U1 using Tapatalk

How do you like the tank pads? I was thinking of getting them for mine.

Sent from my SM-G965U1 using Tapatalk
The tank pads were cut from magnetic sheets I bought from MagKnight.
A few years ago one of the members here posted a pattern and I used that as my guide.
They stick in place very well and have never moved.

How do you like the tank pads? I was thinking of getting them for mine.

Sent from my SM-G965U1 using Tapatalk
The tank pads were cut from magnetic sheets I bought from MagKnight.
A few years ago one of the members here posted a pattern and I used that as my guide.
They stick in place very well and have never moved. Thats a cool idea, where did you get the Magnetic sheets?

Sent from my SM-G965U1 using Tapatalk

How do you like the tank pads? I was thinking of getting them for mine.

Sent from my SM-G965U1 using Tapatalk
The tank pads were cut from magnetic sheets I bought from MagKnight.
A few years ago one of the members here posted a pattern and I used that as my guide.
They stick in place very well and have never moved. Thats a cool idea, where did you get the Magnetic sheets?

Sent from my SM-G965U1 using Tapatalk
Google MagKnight. They have a lot of interesting products.

(02-13-2021, 01:17 AM)Rocky_imp Wrote: [ -> ]

(02-13-2021, 12:43 AM)mvk24_imp Wrote: [ -> ]

(02-12-2021, 10:37 PM)Rocky_imp Wrote: [ -> ]

(02-12-2021, 06:26 AM)mvk24_imp Wrote: [ -> ]

(02-12-2021, 05:28 AM)Rocky_imp Wrote: [ -> ]Triumph gaiters are what I installed on my CB - and my Triumph too

How do you like the tank pads? I was thinking of getting them for mine.

Sent from my SM-G965U1 using Tapatalk

How do you like the tank pads? I was thinking of getting them for mine.

Sent from my SM-G965U1 using Tapatalk
The tank pads were cut from magnetic sheets I bought from MagKnight.
A few years ago one of the members here posted a pattern and I used that as my guide.
They stick in place very well and have never moved.

How do you like the tank pads? I was thinking of getting them for mine.

Sent from my SM-G965U1 using Tapatalk
The tank pads were cut from magnetic sheets I bought from MagKnight.
A few years ago one of the members here posted a pattern and I used that as my guide.
They stick in place very well and have never moved. Thats a cool idea, where did you get the Magnetic sheets?

Sent from my SM-G965U1 using Tapatalk

How do you like the tank pads? I was thinking of getting them for mine.

Sent from my SM-G965U1 using Tapatalk
The tank pads were cut from magnetic sheets I bought from MagKnight.
A few years ago one of the members here posted a pattern and I used that as my guide.
They stick in place very well and have never moved. Thats a cool idea, where did you get the Magnetic sheets?

Sent from my SM-G965U1 using Tapatalk
Google MagKnight. They have a lot of interesting products.

How do you like the tank pads? I was thinking of getting them for mine.

Sent from my SM-G965U1 using Tapatalk
The tank pads were cut from magnetic sheets I bought from MagKnight.
A few years ago one of the members here posted a pattern and I used that as my guide.
They stick in place very well and have never moved. Thats a cool idea, where did you get the Magnetic sheets?

Sent from my SM-G965U1 using Tapatalk
Google MagKnight. They have a lot of interesting products. Will do, thank you

Sent from my SM-G965U1 using Tapatalk