The CB1100 Community Forum

Hi everyone,

Just got a 2013 CB1100 after shopping for years and I thought I'd get started with a likely dumb question:
Do the 4 mounting knobs (that's what i think they are) under the back half of the seat unscrew? They are very tight on mine and I don't want to break anything. It looks like the should accept an allen wrench. I am trying to figure out my options for a sissy bar/luggage rack so if anyone has options they like other than making one, feel free to share that too.

On another note. DMV on NJ is so limited, this beauty has to sit in my garage for quite some time before I can even register it.

Thanks,
Tom

Howdy Tom and welcome to the forum.

For the life of me I can't remember what knobs you could be referring to, but I haven't had my seat off in years. Someone will come along shortly with the info you need.

Welcome to the Forum Tom!

Welcome to the forum, Tom. If you mean the knobs that hold the garnish rail on and look like you could attach a bungee cord to them, the answer is yes. They come undone.

Here is the part fiche for the garnish. There is a nut behind the Hook Bolt (item 11 and 12). https://www.partsfish.com/oemparts/a/hon...d3256/seat

And Welcome!

Thanks for the welcomes. The things are not under under the seat. Don't have to take it off.

Now I think something is missing from them.

Thanks again. Hope the pic is there.

Tom

No. Nothing’s missing.

(04-08-2021, 11:01 PM)Lord Popgun_imp Wrote: [ -> ]Here is the part fiche for the garnish. There is a nut behind the Hook Bolt (item 11 and 12). https://www.partsfish.com/oemparts/a/hon...d3256/seat

And Welcome!

Partfish looks awfully helpful thanks for that.

Welcome to the forum Tom. Those are hook bolts as Popgun indicated. If you choose to install an OEM rack, the 4 hook bolts are to be removed and replaced with the rack’s mounting bolts provided. Here are the rack’s installation instructions for your information:
http://cdn.powersports.honda.com/documen...GC-A40.pdf

(04-08-2021, 11:48 PM)suhawk305_imp Wrote: [ -> ]Welcome to the forum Tom. Those are hook bolts as Popgun indicated. If you choose to install an OEM rack, the 4 hook bolts are to be removed and replaced with the rack’s mounting bolts provided. Here are the rack’s installation instructions for your information:
http://cdn.powersports.honda.com/documen...GC-A40.pdf

Now it all makes sense. Thanks