The CB1100 Community Forum

While doing my 1st valve adjustment (vendors did prior 3) I decided that my CB1100DX deserved a spruce up after 51K miles. Items included:
1. Adjust valves - Could not have done without LakeWylieJoe Norris.
2. Refinish valve cover.
3. Refinish forks.
4. Refinish ABS rings.
5. Refinish black headlight cover and speedo-tak front covers.
6. Replace speedo-tac console cover. Had "melted spot" on it caused by windshield magnification.
7. Recovered leather seat. Corbin recovered my Chip Beck spec seat to original.
8. Touchup gas tank - Had 3 itty bitty chips & 1 itty bitty dent. Local SpeedZone Paint owner took 5 weeks, but kept all decals/badges in place and paint match was dead on.
*FORKS*



*ABS*


*HEADLIGHT & SPEEO-TAC*


*SEAT*

*TANK*

wow..looking good. Wanna do mine? lol

Looks really nice work bflint, good for another 50k now!

You did a great job Bill !

Beautiful bflint.

How "out" were your valve clearances? All cylinders?

>> P R O F E S S I O N A L<<

Good job

(06-05-2021, 08:53 AM)GoldOxide_imp Wrote: [ -> ]Beautiful bflint.

How "out" were your valve clearances? All cylinders?

Spreadsheet Link: http://cb1100forum.com/forum/attachment.php?aid=12929
*
EX : all ok +/- .001in
IN : 5 ok +/- .001in ... 3 out at +.002in

Cracking job, the seat looks like a quality piece.

(06-07-2021, 03:35 AM)bflint_imp Wrote: [ -> ]

(06-05-2021, 08:53 AM)GoldOxide_imp Wrote: [ -> ]Beautiful bflint.

How "out" were your valve clearances? All cylinders?

Spreadsheet Link: http://cb1100forum.com/forum/attachment.php?aid=12929
*
EX : all ok +/- .001in
IN : 5 ok +/- .001in ... 3 out at +.002in

Spreadsheet Link: http://cb1100forum.com/forum/attachment.php?aid=12929
*
EX : all ok +/- .001in
IN : 5 ok +/- .001in ... 3 out at +.002in
Hey, not too bad: ~81%.