(03-09-2018, 01:48 AM)The ferret_imp Wrote: [ -> ]if it were me I'd measure a 17 horn, cut out a cardboard template to match and see if it would possibly fit without buying anything.
Thanks Ferret. That's not a bad idea at all. If it weren't for the four hours round trip drive to check out the nearest '17 I would definitely do this.
That is a shiny bucket. Where did you get it?
Can you take a shot from the side of the bike stepped back a couple feet?
Member:Bosti posted up this pic of his '14 EX...looks like new horns...+ '17 air box cover too
edit...bosti beat me to my post...
thx for the info on just re drilling holes for the new horns. The extra chrome on the new horns really do make them pop out nicely
(03-09-2018, 02:42 AM)PowerDubs_imp Wrote: [ -> ]That is a shiny bucket. Where did you get it?
Can you take a shot from the side of the bike stepped back a couple feet?
Josh,
I bought them from Motodemic along with the headlight unit:
https://motodemic.com/shop/oem-triumph-h...ht-bucket/
I'll take a photo from the side as soon as I'm back home.
(03-09-2018, 02:58 AM)Bosti_imp Wrote: [ -> ]I have changed my horns on 2015 EX for 2017.
Only bigger holes were made on existing brackets.
The looks are much better.
I have posted pic on thread what did you do on your cb ....
Works perfect.
http://cb1100forum.com/forum/showthread....#pid184725
Bosti,
That looks great! Thanks for the info. Are just the horns from the '17 or did you need additional parts to get them mounted?
No just horns 2017 and nothing else.
On 2017 horns at the back are bigger bolts so it was the easiest to drill larger holes on existing brackets on my bike.
Josh,
As requested, here's a picture of the bike from the side:
So I finally went ahead and bit the bullet on this. All that was needed was to drill out the mounting holes on the new horns to fit the bolt. Everything else was plug and play. Really happy with the results.
(06-10-2018, 06:19 AM)CaptainChris_imp Wrote: [ -> ]So I finally went ahead and bit the bullet on this. All that was needed was to drill out the mounting holes on the new horns to fit the bolt. Everything else was plug and play. Really happy with the results.
Chris, if you don’t mind, what are the part numbers for the 2017 horns? I’m having difficulty finding them online. Thank you