The CB1100 Community Forum

Full Version: WIND PROTECTION CB 1100 ex 2015 - yes o no ?
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Pages: 1 2 3 4 5 6
(03-29-2021, 12:43 AM)The ferret_imp Wrote: [ -> ]No doubt without a screen (or trunk) the bike looks better, but sometimes needs (wind protection and carrying capacity) triumphs over looks

You're right. Now I wonder, does anybody have a windscreen (no matter how well or not it protects you) about which he can claim
a) it's mounted / unmounted in 2 minutes without tools, AND
b) it sits fast and tight at higher speeds ?
That one would be my choice.

(03-29-2021, 01:07 AM)Jfro5687_imp Wrote: [ -> ]Never found any un-faired bike comfortable much over 60mph especially trogging down a fast A road or motorway, no matter what it is, however I do understand why folk use them. Personally I’m not a fan, I just ride at a slower more comfortable pace depending upon the wind strength and direction.

That's what I do all the time.
When you have or get a bike with a very good screen it allows you to crush mileage in complete comfort on high speed roads if you need to to get somewhere nice quickly. I can travel at 80MPH on the Motorway on my Tiger 1200 (electrically adjustable touring screen with additional Ali-Express $18 blade on top) with my visor open, listening to music on my cardo headset. It is an absolute breeze and a pleasure to do that trip in those circumstances. Not Honda Goldwing/BMW GTL1600 super comfort I would imagine but in terms of a relaxed non-noisy ride so much can be achieved. I would it equate noise/comfort wise me doing 40MPH on a country broad on the CB1100 it is that good.

I'm just not that mad about throwing luggage and screens on the CB and am lucky to be able to have it as a 40-60MPH country ramble sort of bike. It is not a particular failing of the CB of course, there are tons of bikes like it, practically all of the Triumph classic range and a heap of non faired roadsters from every manufacturer. A very long time ago I owned an 883 Harley Sportster and that was very tiring over 50MPH. I did use that bike for long distance riding and it was totally inappropriate but I was a sucker for punishment then.
Many years ago I test rode the Honda X11, not sure what other markets called it but it was basically the naked Blackbird. I had already been out on the Blackbird which of course was quick and very ‘Honda’. Now the X11 was a brute in comparison simply because you were hanging out in the breeze with nothing to tuck behind. I gave it the beans in 2nd and 3rd on a quiet stretch and I was having to literally hang on. The wind blast was trying to tear me off. Great fun at the time but extremely uncomfortable and the +150mph performance potential was irrelevant because other than easier overtakes you just couldn’t use it. It’s like Kawasaki’s current crop of supercharged ZH2 bikes that I do (genuinely) appreciate but where and when are you actually able to use it? Ans you can’t. The CB is lovely at sub 60mph where I ride 95% of the time. Like Tev said, if I was having to do a lot of fast A road stuff I would probably get a more dedicated tourer type bike. Horses for courses.
(03-30-2021, 06:49 PM)j3gq_imp Wrote: [ -> ]
(03-29-2021, 12:43 AM)The ferret_imp Wrote: [ -> ]No doubt without a screen (or trunk) the bike looks better, but sometimes needs (wind protection and carrying capacity) triumphs over looks

You're right. Now I wonder, does anybody have a windscreen (no matter how well or not it protects you) about which he can claim
a) it's mounted / unmounted in 2 minutes without tools, AND
b) it sits fast and tight at higher speeds ?
That one would be my choice.

(03-29-2021, 01:07 AM)Jfro5687_imp Wrote: [ -> ]Never found any un-faired bike comfortable much over 60mph especially trogging down a fast A road or motorway, no matter what it is, however I do understand why folk use them. Personally I’m not a fan, I just ride at a slower more comfortable pace depending upon the wind strength and direction.

That's what I do all the time.

You're right. Now I wonder, does anybody have a windscreen (no matter how well or not it protects you) about which he can claim
a) it's mounted / unmounted in 2 minutes without tools, AND
b) it sits fast and tight at higher speeds ?
That one would be my choice.


(03-29-2021, 01:07 AM)Jfro5687_imp Wrote: [ -> ]Never found any un-faired bike comfortable much over 60mph especially trogging down a fast A road or motorway, no matter what it is, however I do understand why folk use them. Personally I’m not a fan, I just ride at a slower more comfortable pace depending upon the wind strength and direction.

That's what I do all the time.
Yes, I do. Tested for 7 years and thousand of kms during long distance/hwy trips and up to rev limiter = no complaints.
Street Shield EX, to dismount shield itself/hardware stays, it takes under 2 min...to remove everything you need a flat screwdriver or M7/M8 socket, an Allen key, it will take about 3-4 min..
Condition: if one knows what to do Big Grin
Dart windscreen products are too small to be concerned about removing.
I had the PUIG screen on mine from when I got the bike. Found a lot of buffering spend about 30mins on the motorway each way. I did however notice a drop in fuel economy with it removed. Might try it again soon see if it’s still terrible or just bad because of the winter winds.


Sent from my iPhone using Tapatalk
(03-28-2021, 10:01 PM)Alfgaxatico_imp Wrote: [ -> ][Image: fef83d0dc5f928ec22b5098f0d762478.jpg]
wind protection: POSITIVE or NEGATIVE; about the behavior of the motorcycle. boy friends and girl friends ; I have worn since the day of my purchase a PUIG protector that Aesthetically does not punish the CB 1100 EX 2015 much. But when removing it now in good weather in Spain; I see that the CB is much more noble, and of neutral handling. For me much much better. I open the debate but the truth is that if a motorcycle comes standard in one way it is for something…. although the air comes to me; neither, except to put a boat sail type screen; I think that whoever does not want air ... should buy another touring motorcycle or a car.[Image: 3312c624eff7c183812913a8bfe4bfe7.jpg]


Enviado desde mi iPhone utilizando Tapatalk

well, even the top case is not joking!Smile
(03-30-2021, 08:28 PM)peterbaron_imp Wrote: [ -> ]
(03-30-2021, 06:49 PM)j3gq_imp Wrote: [ -> ]
(03-29-2021, 12:43 AM)The ferret_imp Wrote: [ -> ]No doubt without a screen (or trunk) the bike looks better, but sometimes needs (wind protection and carrying capacity) triumphs over looks

You're right. Now I wonder, does anybody have a windscreen (no matter how well or not it protects you) about which he can claim
a) it's mounted / unmounted in 2 minutes without tools, AND
b) it sits fast and tight at higher speeds ?
That one would be my choice.

(03-29-2021, 01:07 AM)Jfro5687_imp Wrote: [ -> ]Never found any un-faired bike comfortable much over 60mph especially trogging down a fast A road or motorway, no matter what it is, however I do understand why folk use them. Personally I’m not a fan, I just ride at a slower more comfortable pace depending upon the wind strength and direction.

That's what I do all the time.

You're right. Now I wonder, does anybody have a windscreen (no matter how well or not it protects you) about which he can claim
a) it's mounted / unmounted in 2 minutes without tools, AND
b) it sits fast and tight at higher speeds ?
That one would be my choice.


(03-29-2021, 01:07 AM)Jfro5687_imp Wrote: [ -> ]Never found any un-faired bike comfortable much over 60mph especially trogging down a fast A road or motorway, no matter what it is, however I do understand why folk use them. Personally I’m not a fan, I just ride at a slower more comfortable pace depending upon the wind strength and direction.

That's what I do all the time.
Yes, I do. Tested for 7 years and thousand of kms during long distance/hwy trips and up to rev limiter = no complaints.
Street Shield EX, to dismount shield itself/hardware stays, it takes under 2 min...to remove everything you need a flat screwdriver or M7/M8 socket, an Allen key, it will take about 3-4 min..
Condition: if one knows what to do Big Grin

Could you may be post a picture or two of how the space around the handle bar looks when the shield is NOT mounted ? ... what stubs protrude out ... etc. So that I can imagine what I am gonna look like after an accident ?
(04-01-2021, 05:27 AM)j3gq_imp Wrote: [ -> ]
(03-30-2021, 08:28 PM)peterbaron_imp Wrote: [ -> ]
(03-30-2021, 06:49 PM)j3gq_imp Wrote: [ -> ]
(03-29-2021, 12:43 AM)The ferret_imp Wrote: [ -> ]No doubt without a screen (or trunk) the bike looks better, but sometimes needs (wind protection and carrying capacity) triumphs over looks

You're right. Now I wonder, does anybody have a windscreen (no matter how well or not it protects you) about which he can claim
a) it's mounted / unmounted in 2 minutes without tools, AND
b) it sits fast and tight at higher speeds ?
That one would be my choice.

(03-29-2021, 01:07 AM)Jfro5687_imp Wrote: [ -> ]Never found any un-faired bike comfortable much over 60mph especially trogging down a fast A road or motorway, no matter what it is, however I do understand why folk use them. Personally I’m not a fan, I just ride at a slower more comfortable pace depending upon the wind strength and direction.

That's what I do all the time.

You're right. Now I wonder, does anybody have a windscreen (no matter how well or not it protects you) about which he can claim
a) it's mounted / unmounted in 2 minutes without tools, AND
b) it sits fast and tight at higher speeds ?
That one would be my choice.


(03-29-2021, 01:07 AM)Jfro5687_imp Wrote: [ -> ]Never found any un-faired bike comfortable much over 60mph especially trogging down a fast A road or motorway, no matter what it is, however I do understand why folk use them. Personally I’m not a fan, I just ride at a slower more comfortable pace depending upon the wind strength and direction.

That's what I do all the time.
Yes, I do. Tested for 7 years and thousand of kms during long distance/hwy trips and up to rev limiter = no complaints.
Street Shield EX, to dismount shield itself/hardware stays, it takes under 2 min...to remove everything you need a flat screwdriver or M7/M8 socket, an Allen key, it will take about 3-4 min..
Condition: if one knows what to do Big Grin

Could you may be post a picture or two of how the space around the handle bar looks when the shield is NOT mounted ? ... what stubs protrude out ... etc. So that I can imagine what I am gonna look like after an accident ?

Could you may be post a picture or two of how the space around the handle bar looks when the shield is NOT mounted ? ... what stubs protrude out ... etc. So that I can imagine what I am gonna look like after an accident ?
Will get some pics soon...

P.S. Where do you live in A...used to live in Wien/Heiligenstadt near U4 from April to Dec in 1981...good memories.
Nice light effect ...

Pages: 1 2 3 4 5 6