07-08-2022, 03:35 AM
07-08-2022, 06:37 AM
They don't come with a spec, or a measurement (and I do not wanna break mine in a destructive test ...)
but they are good for 10kg each, at least, and a nub isn't needed, they won't come off unless you apply a little
force. Looks like the OP did a good job.
but they are good for 10kg each, at least, and a nub isn't needed, they won't come off unless you apply a little
force. Looks like the OP did a good job.
07-09-2022, 11:26 PM
(07-08-2022, 03:35 AM)1973cb750_imp Wrote: [ -> ]how much weight will they hold? 3d printed stuff i have no experience with
How much they will be able to hold depends on print settings and material you could print them in titanium ... probably expensive and not worth it but you could.
That's why on the page I mention you should test them and make sure you are comfortable with them as I can give zero guaranties about how they will behave on your bike.
For me printed in PETG on a Prusa i3 MK3 they are a snug fit no room to add a bump they just would not fit with one anymore. They are not meant to be left on the bike they're meant to stay with the luggage as prolonged exposure to the elements is probably not ideal for most plastics even if this print is pretty chunky.
07-10-2022, 12:04 AM
(07-09-2022, 11:26 PM)LayerCake_imp Wrote: [ -> ](07-08-2022, 03:35 AM)1973cb750_imp Wrote: [ -> ]how much weight will they hold? 3d printed stuff i have no experience with
How much they will be able to hold depends on print settings and material you could print them in titanium ... probably expensive and not worth it but you could.
That's why on the page I mention you should test them and make sure you are comfortable with them as I can give zero guaranties about how they will behave on your bike.
For me printed in PETG on a Prusa i3 MK3 they are a snug fit no room to add a bump they just would not fit with one anymore. They are not meant to be left on the bike they're meant to stay with the luggage as prolonged exposure to the elements is probably not ideal for most plastics even if this print is pretty chunky.
How much they will be able to hold depends on print settings and material you could print them in titanium ... probably expensive and not worth it but you could.
That's why on the page I mention you should test them and make sure you are comfortable with them as I can give zero guaranties about how they will behave on your bike.
For me printed in PETG on a Prusa i3 MK3 they are a snug fit no room to add a bump they just would not fit with one anymore. They are not meant to be left on the bike they're meant to stay with the luggage as prolonged exposure to the elements is probably not ideal for most plastics even if this print is pretty chunky.
im not interested in printing them i can invest in those i would have to use a 3rd party or buy them from some one