I'm looking to upgrade the passenger pegs on my 2013 since I'll be doing a decent amount of 2-up riding. I'm specifically looking for replacements that have some rubber on them, and would love to find some that offer a bit more space (maybe some mini floorboards). I know that options that fold up may be limited, but has anyone replaced the stock passenger pegs with something they like better?
Sent from my Pixel 6a using Tapatalk
The rear brake pedal on the Italian Stallion I used to have, aka Aprilia Shiver 750, was bent in enough that it was difficult to use, so I made an extension for it out of a piece of pvc pipe, a bottle cap, a hose clamp and two sheet metal screws. It actually worked pretty well.
Rebirds posted that he read ST1100 pegs will fit.
ST1300 look like they will fit, but the CB pin is bigger than the ST1300 pin.
(01-08-2023, 11:47 AM)Lord Popgun_imp Wrote: [ -> ]Rebirds posted that he read ST1100 pegs will fit.
ST1300 look like they will fit, but the CB pin is bigger than the ST1300 pin.
I had this problem when I tried to fit some rubber cushioned Africa Twin pillion pegs ( these were the Optional Honda pegs for the AT ) to my Honda Crossrunner.
So I just drilled the AT pegs thru with the correct size drill to accept the thicker pins... Hey presto!!.. Mucho brownie points from the head of Accounts!!
JT
That's what I would do
