The CB1100 Community Forum

https://www.amazon.com/Lwuckbarrt-Univer...ast_slp_dp

Above link is for a seat cushion I saw on Mr Bezos baby. The honeycomb design is unique and it may circulate air better than my sheepskin. Has anyone used one of these and if so your thoughts on it? Thanks.

I did try a different 3-D honeycomb seat cover when I still had the OEM seat: https://www.sitandfly.com/our-store/s

I liked it pretty well. I could definitely feel the cooling airflow. The only downside was that the plastic material it was woven from was pretty slippery against jeans or textile riding pants.

(07-15-2023, 10:54 AM)3rd_Gear_Steve_imp Wrote: [ -> ]I did try a different 3-D honeycomb seat cover when I still had the OEM seat: https://www.sitandfly.com/our-store/s

I liked it pretty well. I could definitely feel the cooling airflow. The only downside was that the plastic material it was woven from was pretty slippery against jeans or textile riding pants.

Thanks for info Steve. Until I came across seat cover on Amazon was unaware of them.

Lock at this post from a while ago, may help you see it from a different angle ....
http://cb1100forum.com/forum/showthread....#pid316514

(and let me know if the link doesn't work, I don't know how to show post links with a telling short cut)

(07-15-2023, 05:26 PM)The Gecko_imp Wrote: [ -> ]Lock at this post from a while ago, may help you see it from a different angle ....
http://cb1100forum.com/forum/showthread....#pid316514

(and let me know if the link doesn't work, I don't know how to show post links with a telling short cut)

Link worked, thanks for info.

I just tried out a jelled seat pad from Amazon. The reviews were ok, low cost, $28 or so.

It feels very good, a fair bit ‘slippery’ while sitting on it. I’m still doing the evaluation.