The CB1100 Community Forum

The mechanically or hand shaped exhausts should perform the same correct? It's just a matter of craftmanship and time I assume.

Thanks
Randall

(09-20-2013, 12:11 PM)Oboro_imp Wrote: [ -> ]The mechanically or hand shaped exhausts should perform the same correct? It's just a matter of craftmanship and time I assume.

Thanks
Randall

I would assume that you'd get the same benefit whether it's handmade or machine made.

Cool cause it's only 1000 bux or so at Revzilla for the whole system.

I noticed on the Moriwaki exhausts the Ti hand bent has a bigger radius bend coming off the head vs the stainless machine bent set. They claim a bit more hp and torque from the hand built also.

You will love this exhaust! Excellent price as well. Add a PCV, breather mod & dyno tune & your good for about 20% HP gain over stock.

Sounds like a great plan!

i have the full yoshi hand bent ... it's sic ..
performance diff without other mods is probably not as massive as the aural and aesthetic

beautiful bit of gear...

(09-21-2013, 04:11 AM)FUZZY_imp Wrote: [ -> ]You will love this exhaust! Excellent price as well. Add a PCV, breather mod & dyno tune & your good for about 20% HP gain over stock.

increase of 20% over 83(stk per the tbr chart?) hp would be 100hp. Haven't seen that anywhere yet.

(11-10-2013, 03:31 AM)Deanohh_imp Wrote: [ -> ]

(09-21-2013, 04:11 AM)FUZZY_imp Wrote: [ -> ]You will love this exhaust! Excellent price as well. Add a PCV, breather mod & dyno tune & your good for about 20% HP gain over stock.

increase of 20% over 83(stk per the tbr chart?) hp would be 100hp. Haven't seen that anywhere yet.

increase of 20% over 83(stk per the tbr chart?) hp would be 100hp. Haven't seen that anywhere yet.
Stock closer to 79/80. Increase @ 90* temps 16-17%. "About"

(09-21-2013, 02:19 AM)Oboro_imp Wrote: [ -> ]Cool cause it's only 1000 bux or so at Revzilla for the whole system.

"Only" a $1,000 bucks, eh? That's 10% of the price of the bike!