The CB1100 Community Forum

I've pondered the possibility of figuring out how to mount a full Dunstall-style fairing on my EX and was wondering if anyone has done something similar? Originally was inspired by a job done over in Alberta on an old Thruxton:


Thinking of using a fairing from Airtech:

One of our members (I think former member) has done this! His was similar to the Airtech you show. I can’t remember his name, but I saved the picture he posted. Unless someone remembers who he was, I’ll post it up tomorrow evening.

(05-31-2021, 12:13 PM)Lord Popgun_imp Wrote: [ -> ]One of our members (I think former member) has done this! His was similar to the Airtech you show. I can’t remember his name, but I saved the picture he posted. Unless someone remembers who he was, I’ll post it up tomorrow evening.

I tried searching the forum but couldn’t find any topic on it. Do you have a link to the thread?

Here is one, but the pics are not the one I saved. May be a different bike. http://cb1100forum.com/forum/showthread....ht=fairing

A kit from Samurider: http://cb1100forum.com/forum/showthread....ht=fairing

This might show pics of the Don Vesco Rabid Transit. I can't see the pics at work: http://cb1100forum.com/forum/showthread....#pid134315

And now I'm tired of looking

A few years ago, Honda commissioned a "builder" to make a Dick Mann 1970 Daytona tribute bike out of a 2014 standard. It came out looking rather weak, with the fairing mounted high and forward because gauges weren't relocated.

Also a video:
https://www.youtube.com/watch?v=ppL1y0tcb-s

(05-31-2021, 10:35 PM)Lord Popgun_imp Wrote: [ -> ]Here is one, but the pics are not the one I saved. May be a different bike. http://cb1100forum.com/forum/showthread....ht=fairing

A kit from Samurider: http://cb1100forum.com/forum/showthread....ht=fairing

This might show pics of the Don Vesco Rabid Transit. I can't see the pics at work: http://cb1100forum.com/forum/showthread....#pid134315

And now I'm tired of looking

Thanks Popgun. I'll get in touch with the user in that thread and see where they got.

Here is the picture I was thinking of.

[url=https://app.photobucket.com/u/everettmclendon/a/a8b5b03b-ad65-49a1-a3d0-f45df1fc2c20/p/debb4bdd-1d86-483b-a981-b40d175aef20]

I think I look at these with curiosity, but would never own such a configuration. Tucked down, I reckon they must drill through the air well.

I ended up with the fairing. As GoldOxide says, works very nice if you are tucked down - which is not my style. The air goes over the windscreen then tumbles into my lap. Tried adding a coupe vents in the windscreen to fill in the low pressure zone and that did not work.

So it's off the bike for the time being.

(06-03-2021, 03:27 PM)Rboe_imp Wrote: [ -> ]I ended up with the fairing. As GoldOxide says, works very nice if you are tucked down - which is not my style. The air goes over the windscreen then tumbles into my lap. Tried adding a coupe vents in the windscreen to fill in the low pressure zone and that did not work.

So it's off the bike for the time being.

I am sure my back would punish me if I attempted to tuck down for any amount of time while touring.