The CB1100 Community Forum

(11-10-2020, 11:43 PM)Lord Popgun_imp Wrote: [ -> ]Solid state.

Thanks PG. Well, arguably things should work.

(11-10-2020, 11:43 PM)Lord Popgun_imp Wrote: [ -> ]Solid state.

Is that like deep state, but thicker?

I installed the Motogadget m-blaze pin turn signals on mine, and they did the fast-flash until I installed the Posh relay. The wiring on them is really delicate, so i didn't feel like trial-and-error'ing with soldering in resistors. The relay was ~$100, IIRC, but it's a simple swap.

(11-14-2020, 02:35 AM)12milesout_imp Wrote: [ -> ]I installed the Motogadget m-blaze pin turn signals on mine, and they did the fast-flash until I installed the Posh relay. The wiring on them is really delicate, so i didn't feel like trial-and-error'ing with soldering in resistors. The relay was ~$100, IIRC, but it's a simple swap.

Thanks for the feedback, 12milesout. Would you let us know if the fronts still function as running lights when they aren't turn signals?

(11-14-2020, 03:24 AM)pekingduck_imp Wrote: [ -> ]

(11-14-2020, 02:35 AM)12milesout_imp Wrote: [ -> ]I installed the Motogadget m-blaze pin turn signals on mine, and they did the fast-flash until I installed the Posh relay. The wiring on them is really delicate, so i didn't feel like trial-and-error'ing with soldering in resistors. The relay was ~$100, IIRC, but it's a simple swap.

Thanks for the feedback, 12milesout. Would you let us know if the fronts still function as running lights when they aren't turn signals?

I'm 99% certain that they do, but will check tonight.

(11-14-2020, 02:35 AM)12milesout_imp Wrote: [ -> ]I installed the Motogadget m-blaze pin turn signals on mine, and they did the fast-flash until I installed the Posh relay. The wiring on them is really delicate, so i didn't feel like trial-and-error'ing with soldering in resistors. The relay was ~$100, IIRC, but it's a simple swap.

I think that's what I have,maybe about the size of a dime? Is the relay a direct plug in? I made small bezels to bolt the lights to the rear grab bars and to bolt them to the stock locations on the headlight bracket.

(11-14-2020, 07:18 AM)FLYTYM_imp Wrote: [ -> ]

(11-14-2020, 02:35 AM)12milesout_imp Wrote: [ -> ]I installed the Motogadget m-blaze pin turn signals on mine, and they did the fast-flash until I installed the Posh relay. The wiring on them is really delicate, so i didn't feel like trial-and-error'ing with soldering in resistors. The relay was ~$100, IIRC, but it's a simple swap.

I think that's what I have,maybe about the size of a dime? Is the relay a direct plug in? I made small bezels to bolt the lights to the rear grab bars and to bolt them to the stock locations on the headlight bracket.

I think that's what I have,maybe about the size of a dime? Is the relay a direct plug in? I made small bezels to bolt the lights to the rear grab bars and to bolt them to the stock locations on the headlight bracket.
Yes, Yes, and I did the same.

Peking: the front lights do stay on as running lights.

[/quote]

the front lights do stay on as running lights.
[/quote]

That's good to know. So even by using a different LED-specific flasher, or resistors in-line, you would lose the running light feature. That makes the Posh units worth the expense.

(11-14-2020, 11:40 AM)12milesout_imp Wrote: [ -> ]

(11-14-2020, 07:18 AM)FLYTYM_imp Wrote: [ -> ]

(11-14-2020, 02:35 AM)12milesout_imp Wrote: [ -> ]I installed the Motogadget m-blaze pin turn signals on mine, and they did the fast-flash until I installed the Posh relay. The wiring on them is really delicate, so i didn't feel like trial-and-error'ing with soldering in resistors. The relay was ~$100, IIRC, but it's a simple swap.

I think that's what I have,maybe about the size of a dime? Is the relay a direct plug in? I made small bezels to bolt the lights to the rear grab bars and to bolt them to the stock locations on the headlight bracket.

I think that's what I have,maybe about the size of a dime? Is the relay a direct plug in? I made small bezels to bolt the lights to the rear grab bars and to bolt them to the stock locations on the headlight bracket.
Yes, Yes, and I did the same.

Peking: the front lights do stay on as running lights.

I think that's what I have,maybe about the size of a dime? Is the relay a direct plug in? I made small bezels to bolt the lights to the rear grab bars and to bolt them to the stock locations on the headlight bracket.
Yes, Yes, and I did the same.

Peking: the front lights do stay on as running lights. Can you send a a few pictures of the lights on the bike,it's going to be awhile before I get mine on the bike. COGNITO MOTO makes some absolutely gorgeous parts. I'll send you a PM.