12-14-2021, 03:03 AM
I could use a little help in selecting the right speed bleeders. One type I could easily find is a German brand (Stahlbus), and they provided the following sketch (for the Nissin calipers):
As you can see the valve sticks out about 1 inch (or 26mm) from the valve seat, which is considerably more than the OEM bleeders. On the rear caliper sure no problem, on the front caliper and the clutch this is more tricky.
Would anybody know shorter speed valves ?
For anybody interested in technical details, here follows the [url=http://www.stahlbus.com/products/en/bleeding-system/index.php/]link with product details, sketches, and other descriptions.
As you can see the valve sticks out about 1 inch (or 26mm) from the valve seat, which is considerably more than the OEM bleeders. On the rear caliper sure no problem, on the front caliper and the clutch this is more tricky.
Would anybody know shorter speed valves ?
For anybody interested in technical details, here follows the [url=http://www.stahlbus.com/products/en/bleeding-system/index.php/]link with product details, sketches, and other descriptions.