The CB1100 Community Forum

(05-08-2023, 07:48 AM)Nachodaddy_imp Wrote: [ -> ]That reminds me, I need to change my coolant.

dont forget the tstat and a new gasket as well,

(05-08-2023, 07:33 AM)Cormanus_imp Wrote: [ -> ]He is indeed: Tev62.

O0o0o thats Tev! Nice guy I didnt know he had a channel. I'll have to follow

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
Also I did my Front brakes and Clutch flush earlier.

My clutch reservoir was real dirty and the bottom if the reservoir looked like it had algae growing in it lol. I had to give it a scrub with a clean nylon brush and fill/remove a few times to get the crap out.

Flush was easy after that. Took me a few min to realize the Shift linkage and rod had 2 dots that correspond to each other. I marked a line with a soap stone before I took it off and then accidently washing it off when I was wiping off all the dirt and oil while the cover was off.

Felt good to be able to get something done.

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca

MVK24, glad it worked out for you. Your photos make it all much clearer, too. Thanks.

(05-08-2023, 08:01 AM)1973cb750_imp Wrote: [ -> ]

(05-08-2023, 07:48 AM)Nachodaddy_imp Wrote: [ -> ]That reminds me, I need to change my coolant.

dont forget the tstat and a new gasket as well,

dont forget the tstat and a new gasket as well,

(05-08-2023, 08:31 AM)mvk24_imp Wrote: [ -> ]

(05-08-2023, 07:33 AM)Cormanus_imp Wrote: [ -> ]He is indeed: Tev62.

O0o0o thats Tev! Nice guy I didnt know he had a channel. I'll have to follow

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
Also I did my Front brakes and Clutch flush earlier.

My clutch reservoir was real dirty and the bottom if the reservoir looked like it had algae growing in it lol. I had to give it a scrub with a clean nylon brush and fill/remove a few times to get the crap out.

Flush was easy after that. Took me a few min to realize the Shift linkage and rod had 2 dots that correspond to each other. I marked a line with a soap stone before I took it off and then accidently washing it off when I was wiping off all the dirt and oil while the cover was off.

Felt good to be able to get something done.

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca

Hmmm. That was quite the sewer mvk24.

(05-08-2023, 09:58 AM)GoldOxide_imp Wrote: [ -> ]

(05-08-2023, 08:31 AM)mvk24_imp Wrote: [ -> ]

(05-08-2023, 07:33 AM)Cormanus_imp Wrote: [ -> ]He is indeed: Tev62.

O0o0o thats Tev! Nice guy I didnt know he had a channel. I'll have to follow

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca
Also I did my Front brakes and Clutch flush earlier.

My clutch reservoir was real dirty and the bottom if the reservoir looked like it had algae growing in it lol. I had to give it a scrub with a clean nylon brush and fill/remove a few times to get the crap out.

Flush was easy after that. Took me a few min to realize the Shift linkage and rod had 2 dots that correspond to each other. I marked a line with a soap stone before I took it off and then accidently washing it off when I was wiping off all the dirt and oil while the cover was off.

Felt good to be able to get something done.

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca

Hmmm. That was quite the sewer mvk24.

Hmmm. That was quite the sewer mvk24. Yea I'm not sure how lol. I'm very meticulous with my vehicles. I didnt have a leak that I know of but might be worth ordering a new gasket for the master cylinder. It really did look like there was a thin layer of moss or something on the bottom.

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca

Lots of dirt and corrosion in this reservoir!

Pictures and videos much appreciated....

(05-08-2023, 07:35 PM)Wagonpeddler_imp Wrote: [ -> ]Pictures and videos much appreciated....

No problem,

For anyone else looking for a photo of where the clutch fluid bleeder is i'll circle it.

Once you take off your Gear shift linkage (1 10mm bolt), you then remove the cover behind it thats being held on with 3 Allen key bolts.

2014 CB1100, 1981 KZ440 LTD, 1993 Yamaha XJ600 Seca, 1994 Yamaha XJ600 Seca

(05-08-2023, 07:48 AM)Nachodaddy_imp Wrote: [ -> ]That reminds me, I need to change my coolant.

As long as it is the very best bottled stuff from the top of Humphreys Peak .

(05-09-2023, 04:47 AM)Tev62_imp Wrote: [ -> ]

(05-08-2023, 07:48 AM)Nachodaddy_imp Wrote: [ -> ]That reminds me, I need to change my coolant.

As long as it is the very best bottled stuff from the top of Humphreys Peak .

As long as it is the very best bottled stuff from the top of Humphreys Peak . Only the best.