The CB1100 Community Forum

(08-31-2025, 06:47 AM)peterbaron Wrote: [ -> ]

(08-30-2025, 04:30 PM)Offroad Wrote: [ -> ]Made it home.......
 
They will measure Tuesday but test rode and felt warped rotors are the problem. 
I do remember us driving through an inch or two of water after a hot run with heavy braking by me lol so this could be the case?

Distortion of the rotors caused by water (not corrosion) is very, very unlikely. 
Distortion of the rotors caused by overheating – yes.
It's possible that one of the ABS ring slot is dirty or cracked and is interfering with the ABS on/off pulse signal. This won't behave like a normal ABS interference, but it could cause a similar phenomenon or pulsing.

Got a call from service that my rotors were out of tolerance and I also had a seized, wheel bearing on one side that was causing the clicking noise?
Nothing that money won't fix lol
I've been hearing a change of sound when I lean heavily on the front wheel bearing, but I kept thinking it was the tire.

Wow Offroad, you literally rode the wheels off your bike!

You should have seen him from behind...well I saw them for 2 or 3 turns, then Mr. P, SCCB rider and Offroad were gone, and my goal then was to try and not get passed by Cytocatlady and Sneaky Fast.

(09-02-2025, 02:15 PM)the Ferret Wrote: [ -> ]You should have seen him from behind...well I saw them for 2 or 3 turns, then Mr. P, SCCB rider and Offroad were gone, and my goal then was to try and not get passed by Cytocatlady and Sneaky Fast.

Unlikely I would catch you, but that Cytocatlady...?? She maintained a quick pace!

A rally image of Hank, showing his Honda Red Spirit. [img][/img]