The CB1100 Community Forum

From the you tube clip, I do not see ETC light on the RMP meter how come my RS has?

(10-01-2017, 01:13 AM)VLJ_imp Wrote: [ -> ]

(09-30-2017, 04:54 PM)Cormanus_imp Wrote: [ -> ]Before you dive in VLJ, re-read your earlier posts. Then forget them and go and buy a 2017 CB1100.

That's true, and the other thing is these videos from Japan keep showing the various CB1100 models going around corners, one right after another. Man, do they drag pegs early. They seem to have virtually no cornering clearance. It's like watching Harleys.

Quote:Then forget them and go and buy a 2017 CB1100.
While watching Mr Kiddo's video again last night, plus the new-vs-old sound comparison video, I was 99% ready to do just that. I don't have the space for two bikes and can't really afford another $12k bike right now, and still I was just about ready to pull the trigger.

The lack-of-space and $$ issues are real problems, but so are the T120 and Ninja 1000 (ZX1000SX where you live, I believe). The T120 pulls at me nearly as hard as the CB does, plus I know it has more low-down punch, legroom, and ground clearance, while the sport-touring Kawi removes any and all engine performance/cornering-clearance worries.

I want all three, plus an R1200RT. I need a Jay Leno garage.

Honestly, I think I can get past the CB's lack of power and heavy-footed slow-pokiness, especially if I were to add it as a second bike while keeping the XSR900. The rest of the big CB is just that pleasing to me. I'm almost certain that I would grow to love the hell out of it over time. I am also convinced now that it won't be too buzzy for me on the freeway, which had been a major concern.

The lack of cornering clearance, though, that's a bugger. I'm not yet ready for the world of Harley-style cruiserdom, and abandoning all cornering fun.

That one worries me.

I think you should reread this [url=http://www.motorcycle.com/shoot-outs/retro-roadster-shootout-2017]review of the triumph, CB and R9T regarding handling and steering (triumph is "slow to steer", "clumsy", heavy and "steer like a truck").

As for cornering clearance, these pictures show the triumph and honda are similar but the honda has a bit better clearance I think.

curleyjoe, that same Motorcyclist review says the CB1100 has the least cornering clearance of the three bikes, although the T120 isn't much better. They do say that the Honda handles better than the T120, but it drags pegs sooner than the Triumph.

This video clearly shows just how little lean angle is necessary to make the Honda touch down and shoot sparks...

[url=https://www.youtube.com/watch?v=PCMNT1VlszM&app=desktop]https://www.youtube.com/watch?v=PCMNT1VlszM&app=desktop

That's pretty bad. That's basically cruiser territory.

Strange, too, that the Honda touches down sooner than the Triumph, as is the fact that the Honda has less legroom despite having a taller seat height. One would think the Triumph's greater legroom and overall lower stance would lead to reduced ground clearance compared to the Honda, yet it doesn't.

My guess is that the T120's two-inch-shorter wheelbase makes up the difference.

As for the Triumph, I've ridden that one a few times, and it definitely has heavy steering and handles a bit truckishly; certainly compared to my much lighter, nimbler XSR900. Compared to the Triumph the CB1100 with its wider bars and skinnier rear tire doubtless steers more lightly, but it's so long, soft, and heavy that it's still going to handle like a truck compared to the Yamaha.

show me pics of your XSR900 tires...and of the other side, its time for a testdrive with a 2017 cb modell

A test drive of a '17 would be just the thing.

Unfortunately....

or if you need in every curve such a angle that you are happy with driving stay just at your XSR900..bcos thats a "" sporty "" nakedbike......

Yup, it sounds a bit more agressive and deeper tone compared to previous version.

(09-29-2017, 05:48 AM)VLJ_imp Wrote: [ -> ]https://www.youtube.com/watch?v=M4MvqWHrVQU

RS instead of EX, but they share identical motor-specs and exhausts, so the two bikes ought to sound exactly the same.

Anyway, every time he blips the throttle, I can't believe that's a stock exhaust. That thing sounds absolutely perfect: deep, throaty, aggressive, snarly, but not obnoxiously loud.

I can't believe that's a stock exhaust on a modern Japanese bike!

Wow. Man, that sounds fantastic.

It's not Electronic traction control but Electronic Toll Control.

(10-01-2017, 02:48 PM)Ban_imp Wrote: [ -> ]From the you tube clip, I do not see ETC light on the RMP meter how come my RS has?

You can do a lot of cornering without worrying about lack of cornering clearance

(10-01-2017, 01:13 AM)VLJ_imp Wrote: [ -> ]

(09-30-2017, 04:54 PM)Cormanus_imp Wrote: [ -> ]Before you dive in VLJ, re-read your earlier posts. Then forget them and go and buy a 2017 CB1100.

That's true, and the other thing is these videos from Japan keep showing the various CB1100 models going around corners, one right after another. Man, do they drag pegs early. They seem to have virtually no cornering clearance. It's like watching Harleys.

Quote:Then forget them and go and buy a 2017 CB1100.
While watching Mr Kiddo's video again last night, plus the new-vs-old sound comparison video, I was 99% ready to do just that. I don't have the space for two bikes and can't really afford another $12k bike right now, and still I was just about ready to pull the trigger.

The lack-of-space and $$ issues are real problems, but so are the T120 and Ninja 1000 (ZX1000SX where you live, I believe). The T120 pulls at me nearly as hard as the CB does, plus I know it has more low-down punch, legroom, and ground clearance, while the sport-touring Kawi removes any and all engine performance/cornering-clearance worries.

I want all three, plus an R1200RT. I need a Jay Leno garage.

Honestly, I think I can get past the CB's lack of power and heavy-footed slow-pokiness, especially if I were to add it as a second bike while keeping the XSR900. The rest of the big CB is just that pleasing to me. I'm almost certain that I would grow to love the hell out of it over time. I am also convinced now that it won't be too buzzy for me on the freeway, which had been a major concern.

The lack of cornering clearance, though, that's a bugger. I'm not yet ready for the world of Harley-style cruiserdom, and abandoning all cornering fun.

That one worries me.

That is one properly filthy motorcycle.

:golf applause:

#19 rides one pretty quickly through the curves

https://www.youtube.com/watch?v=T2h_7GwTs6g

On the stock 140 rear tire even you can run them until you curl the rubber on the edge without scraping, especially once you remove the ridiculous curb feelers on the pegs.





I have not been able to run them clear to the edge with a 160 rear.

(10-02-2017, 10:44 PM)The ferret_imp Wrote: [ -> ]#19 rides one pretty quickly through the curves

https://www.youtube.com/watch?v=T2h_7GwTs6g

On the stock 140 rear tire even you can run them until you curl the rubber on the edge without scraping, especially once you remove the ridiculous curb feelers on the pegs.





I have not been able to run them clear to the edge with a 160 rear.

How does one go about learning how to do that without crashing?

I remember a post & video here a couple weeks ago that showed a guy slide out and crash while going very slow and didn't look very far leaned over to me, so I am overly cautious.