I sold my 2014 CB1100, but took off the suspension bits I had installed last year. Ikon shocks. Price will be $350 plus shipping.
Only have about 3,000 miles on them. Made the bike ride night and day better from stock!
You can email me at black06883@yahoo.com, call or text me at 412-417-6554
Brian
I'm trying to raise some funds for the Multistrada I picked up, so I am motivated to sell this set-up!!
I am trying to figure out (again!) how to crop the pictures!
[
attachment=949]
[
attachment=950]
those forks for the rs? i assume they fit the ex 17?
My apologies for the late reply. I don't come on to much anymore. Fit the EX, I'm almost positive the RS forks are bigger diameter, so I would say no, to that. But the slot right in on the 2014 triple trees. Twenty minutes and a night & day return for the suspension.
The part numbers for EX and RS forks are the same.
They are excellent forks. SHOWA's claim is that they smooth out the transition between low speed and high speed damping with the valve internals. I really do rate them and think the front end ride on my 2017 EX is exceptional for a bike without adjustable damping. These used to be a factory upgrade you could buy for many Harleys.
(02-05-2026, 06:38 AM)Cormanus Wrote: [ -> ]The part numbers for EX and RS forks are the same.
They are not the same. The EX forks are 41mm. The RS forks are 43mm.
I just looked over parts fiche again.
year the rs has bigger brakes and better calipers i been looking at maybe swaping to the rs front end
![[Image: 2TOozuw.jpeg]](https://i.imgur.com/2TOozuw.jpeg)
I actually looked at doing the same thing to my 2014 STD. More money than what I'm willing to lay out. I did the easy stuff first. I had started collecting the rearend bits, then the tariffs stopped that. I have a rear RS wheel, cushions and sprocket carrier. I know for a fact that that particular set-up will not slot into the stock steel swingarm.
what are you gona do with the parts you have beardo?
Shoot me a PM and we can talk.