11-04-2020, 12:30 AM
After reading the post "modular helmet?" I started a little research and search on the [url=http://sharp.dft.gov.uk/]Sharp website. First I wanted to really understand the background and test approach, next I wanted to see what one has to spend on a good helmet. Since not everybody may have that patience, and as a minimum, I'd recommend reading the following sections : fitting guide, parts of the FAQ including a) is the safety rating the only thing to consider when buying ... and b) what should I do if I have a low rated helmet. Unfortunately I cannot provide direct links because of the way the FAQ is designed.
Next, I used the following criteria under Helmet Search:
manufacturer= all,
type = system helmet,
rating = *****.
The surprise result is that out of 6 helmets presented, one is quite expensive, one becomes unlatched in too many cases (yes, it is rated *****), and the remaining helmets are all made by Caberg, and sold for about 100-150 USD.
Built in Italy, and sold all around Europe (U.S. too ?), I would like to know
- if they have been sold in significant numbers ?
- if you own or owned one ?
- what your experience has been ?
Next, I used the following criteria under Helmet Search:
manufacturer= all,
type = system helmet,
rating = *****.
The surprise result is that out of 6 helmets presented, one is quite expensive, one becomes unlatched in too many cases (yes, it is rated *****), and the remaining helmets are all made by Caberg, and sold for about 100-150 USD.
Built in Italy, and sold all around Europe (U.S. too ?), I would like to know
- if they have been sold in significant numbers ?
- if you own or owned one ?
- what your experience has been ?
![[Image: ac8f4cc3e280d6848718807c213a0c8c.jpg]](https://cb1100forum.net/forum/uploads/imp/202011/ac8f4cc3e280d6848718807c213a0c8c.jpg)